Deep-Ultraviolet Optoelectronic Devices Enabled by the Hybrid Integration of Next-Generation Semiconductors and Emerging Device Platforms

Access Restrictions
At the time of archiving, the student author of this dissertation opted to temporarily restrict access to it. The full text of this dissertation became available to the public after the expiration of the embargo on 2021-11-23.

Abstract
In this dissertation, the design and fabrication of deep-ultraviolet photodetectors were investigated based on gallium oxide and its alloys, through the heterogeneous integration with metallic and other inorganic materials. The crystallographic properties of oxide films grown directly and indirectly on silicon, magnesium oxide, and sapphire are examined, and the challenges that hinder the realization of efficient and reliable deep-ultraviolet photodetectors are described. In recent years, single-crystalline heterojunction photodiodes employing beta-polymorph gallium oxide thin films as the main absorption layers have been studied. However, reports in the literature generally lack a thorough examination of epitaxial growth processes of high-quality single-crystalline beta-polymorph gallium oxide thin films on metals, such as transition metal nitrides. My research was initiated by demonstrating an ultraviolet-C photodetector based on an amorphous aluminum gallium oxide photoconductive layer grown directly on (100)-oriented silicon. The solar-blind photodetector exhibited a peak spectral responsivity of 1.17 A/W. This is the first reported gallium oxide-based photodetector to have been grown and fabricated directly on silicon. The growth of high-quality monoclinic crystals on cubic silicon is a challenging process, which is largely due to the large lattice mismatch that compromises the crystal quality of the oxide layer, and leads to the degradation of device performance. This issue was addressed by growing the material on substrates with metal nitride templates, which resulted in improvements to the oxide crystal quality. Consequently, high optical gain ultraviolet-C photodetectors were fabricated based on a beta-polymorph gallium oxide photoconductive layer grown on magnesium oxide and silicon substrates with titanium nitride templates. The enhanced solar-blind photodetectors exhibited peak spectral responsivity levels as high as 276 A/W. Moreover, thin polymorphic gallium oxide films were grown on c-plane sapphire using pulsed laser deposition for the first time. The stacked thin films, namely epsilon- and beta-polymorph gallium oxide, were sequentially grown under the same conditions. X-ray diffraction measurements and transmission electron microscopy micrographs confirmed a heteroepitaxially grown beta-polymorph gallium oxide on a heterogeneously nucleated epsilon-polymorph gallium oxide polymorphic heterostructure on c-plane sapphire, which had rocking-curve widths of 1.4° (β-Ga2O3 (−603)) and 0.6° (ε-Ga2O3 (006)).

Citation
Alfaraj, N. (2019). Deep-Ultraviolet Optoelectronic Devices Enabled by the Hybrid Integration of Next-Generation Semiconductors and Emerging Device Platforms. KAUST Research Repository. https://doi.org/10.25781/KAUST-0144P

DOI
10.25781/KAUST-0144P

Permanent link to this record

Version History

Now showing 1 - 2 of 2
VersionDateSummary
3*
2021-11-22 06:03:55
Updated main dissertation file and abstract based on student request.
2020-02-24 12:36:02
Updated main dissertation file received from student.
* Selected version