Show simple item record

dc.contributor.authorMalbeteau, Yoann
dc.contributor.authorJohansen, Kasper
dc.contributor.authorAragon Solorio, Bruno Jose Luis
dc.contributor.authorAl-Mashhawari, Samir K.
dc.contributor.authorMcCabe, Matthew F.
dc.date.accessioned2021-08-23T08:37:56Z
dc.date.available2021-08-23T08:37:56Z
dc.date.issued2021-08-18
dc.date.submitted2021-06-16
dc.identifier.citationMalbéteau, Y., Johansen, K., Aragon, B., Al-Mashhawari, S. K., & McCabe, M. F. (2021). Overcoming the Challenges of Thermal Infrared Orthomosaics Using a Swath-Based Approach to Correct for Dynamic Temperature and Wind Effects. Remote Sensing, 13(16), 3255. doi:10.3390/rs13163255
dc.identifier.issn2072-4292
dc.identifier.doi10.3390/rs13163255
dc.identifier.urihttp://hdl.handle.net/10754/670728
dc.description.abstractThe miniaturization of thermal infrared sensors suitable for integration with unmanned aerial vehicles (UAVs) has provided new opportunities to observe surface temperature at ultra-high spatial and temporal resolutions. In parallel, there has been a rapid development of software capable of streamlining the generation of orthomosaics. However, these approaches were developed to process optical and multi-spectral image data and were not designed to account for the often rapidly changing surface characteristics inherent in the collection and processing of thermal data. Although radiometric calibration and shutter correction of uncooled sensors have improved, the processing of thermal image data remains difficult due to (1) vignetting effects on the uncooled microbolometer focal plane array; (2) inconsistencies between images relative to in-flight effects (wind-speed and direction); (3) unsuitable methods for thermal infrared orthomosaic generation. Here, we use thermal infrared UAV data collected with a FLIR-based TeAx camera over an agricultural field at different times of the day to assess inconsistencies in orthophotos and their impact on UAV-based thermal infrared orthomosaics. Depending on the wind direction and speed, we found a significant difference in UAV-based surface temperature (up to 2 °C) within overlapping areas of neighboring flight lines, with orthophotos collected with tail wind being systematically cooler than those with head wind. To address these issues, we introduce a new swath-based mosaicking approach, which was compared to three standard blending modes for orthomosaic generation. The swath-based mosaicking approach improves the ability to identify rapid changes of surface temperature during data acquisition, corrects for the influence of flight direction relative to the wind orientation, and provides uncertainty (pixel-based standard deviation) maps to accompany the orthomosaic of surface temperature. It also produced more accurate temperature retrievals than the other three standard orthomosaicking methods, with a root mean square error of 1.2 °C when assessed against in situ measurements. As importantly, our findings demonstrate that thermal infrared data require appropriate processing to reduce inconsistencies between observations, and thus, improve the accuracy and utility of orthomosaics.
dc.description.sponsorshipThis research was funded by King Abdullah University of Science and Technology (KAUST) and supported by Competitive Research Grant Nos. URF/1/2550-1 and URF/1/3413-01.
dc.description.sponsorshipWe would like to thank Mark Tester, Mitchell J.L. Morton and Gabriele M. Fiene from the Center for Desert Agriculture, The Salt Lab, King Abdullah University of Science and Technology for designing and running the plant experiment. We would also like to acknowledge Magdi A.A. Mousa and his team at the King Abdulaziz University Agricultural Research Station in Hada Al-Sham for undertaking day-to-day duties of the plant experiment such as irrigation, fertilization, removal of weeds and plot maintenance. B.A. acknowledges additional research support by an appointment to the NASA Postdoctoral Program at the Jet Propulsion Laboratory, California Institute of Technology, administered by Universities Space Research Association under contract with NASA.
dc.publisherMDPI AG
dc.relation.urlhttps://www.mdpi.com/2072-4292/13/16/3255
dc.rightsThis article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license.
dc.rights.urihttps://creativecommons.org/licenses/by/4.0/
dc.titleOvercoming the Challenges of Thermal Infrared Orthomosaics Using a Swath-Based Approach to Correct for Dynamic Temperature and Wind Effects
dc.typeArticle
dc.contributor.departmentBiological and Environmental Science and Engineering (BESE) Division
dc.contributor.departmentEnvironmental Science and Engineering
dc.contributor.departmentEnvironmental Science and Engineering Program
dc.contributor.departmentWater Desalination and Reuse Research Center (WDRC)
dc.identifier.journalRemote Sensing
dc.eprint.versionPublisher's Version/PDF
dc.contributor.institutionVanderSat, Wilhelminastraat 43a, 2011 VK Haarlem, The Netherlands.
dc.contributor.institutionJet Propulsion Laboratory, California Institute of Technology, Pasadena, CA 91109, USA.
dc.identifier.volume13
dc.identifier.issue16
dc.identifier.pages3255
kaust.personMalbeteau, Yoann
kaust.personJohansen, Kasper
kaust.personAragon Solorio, Bruno Jose Luis
kaust.grant.numberURF/1/2550-1
kaust.grant.numberURF/1/3413-01
dc.date.accepted2021-08-11
refterms.dateFOA2021-08-23T08:38:43Z
kaust.acknowledged.supportUnitCompetitive Research Grant


Files in this item

Thumbnail
Name:
remotesensing-13-03255.pdf
Size:
10.29Mb
Format:
PDF
Description:
Publisher's version

This item appears in the following Collection(s)

Show simple item record

This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license.
Except where otherwise noted, this item's license is described as This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license.