Surface preparation strategies in secondary bonded thermoset-based composite materials: A review
KAUST DepartmentPhysical Science and Engineering (PSE) Division
Mechanical Engineering Program
Embargo End Date2023-04-27
Permanent link to this recordhttp://hdl.handle.net/10754/668973
MetadataShow full item record
AbstractA considerable weight reduction in thermoset-based composite is attained by replacing mechanical fasteners with a structural adhesive during the secondary bonding. The quality of this adhesively-bonded joint greatly depends on the surface preparation strategies applied to the mating composites as they influence the surface morphology, topography, interface composition, and mechanical performance of the adherend–adhesive interphase. We reviewed the recent progress of surface preparation strategies generally employed for the aerospace or automotive-grade thermoset composites (carbon/epoxy and glass/epoxy). Then, we briefly reviewed the role of each of them in promoting adhesion mechanisms, i.e., mechanical interlocking, adsorption/chemical bonding, and diffusion. Subsequently, we analyzed qualitatively and quantitatively the effects on indicators associated with surface characteristics of the treated surface and mechanical performance metrics. Finally, we discussed two emerging solutions, namely substrate patterning, and adhesive tailoring. Our analysis shows that creating heterogeneity in the composite adherends or adhesive enables effective tuning of the joint performances.
CitationYudhanto, A., Alfano, M., & Lubineau, G. (2021). Surface preparation strategies in secondary bonded thermoset-based composite materials: A review. Composites Part A: Applied Science and Manufacturing, 147, 106443. doi:10.1016/j.compositesa.2021.106443
SponsorsThis work was supported by the King Abdullah University of Science and Technology (KAUST) that provides the Competitive Research Grant (grant number CRG6 2017 3388) and Baseline Research Funds (grant number BAS/1/1315-01-01). We also thank Dr. Arturo Pascuzzo (UNICAL), Dr. Ran Tao and Dr. Ahmed Wagih (COHMAS Laboratory, KAUST) for discussions and supplying experimental data.