Show simple item record

dc.contributor.authorShi, Hao
dc.contributor.authorUddeen, Kalim
dc.contributor.authorAn, Yanzhao
dc.contributor.authorPei, Yiqiang
dc.contributor.authorJohansson, Bengt
dc.date.accessioned2021-04-21T07:12:45Z
dc.date.available2021-04-21T07:12:45Z
dc.date.issued2021-04-10
dc.identifier.citationShi, H., Uddeen, K., An, Y., Pei, Y., & Johansson, B. (2021). Statistical study on engine knock oscillation and heat release using multiple spark plugs and pressure sensors. Fuel, 297, 120746. doi:10.1016/j.fuel.2021.120746
dc.identifier.issn0016-2361
dc.identifier.doi10.1016/j.fuel.2021.120746
dc.identifier.urihttp://hdl.handle.net/10754/668882
dc.description.abstractEngine knock has been an inherent problem that limits engine efficiency improvement and threatens engine service life. To trigger the controllable knock, a specialized liner with installing four side spark plugs mounted on the cylinder head are used in this study to produce various in-cylinder flame propagation. Various spark strategies (e.g., spark timing, spark number, spark location) are applied to generate different auto-ignition sites and knock characteristics. Up to five channels of pressure signal are collected to analyze the knock intensities regarding different spark strategies. To investigate the knock-induced fluctuations and heat release, we use the multiple correlations to evaluate the maximum amplitude of pressure oscillation (MAPO) respecting different influential factors and building a multiple linear regression (MLR) model for MAPO prediction and validate it against the experiment results. Besides, the Wiebe function and curve-fitting techniques are applied to estimate the energy released by auto-ignition in each cycle, and its relations with knock intensity are assessed. The results show that the average growth of pre-oscillation plays an important role in MAPO value (correlation coefficient, r_s = 0.965), the established MLR model possesses high accuracy for MAPO prediction. The pressure oscillation regarding the 1st resonance mode is extracted from the band-pass filtered signal, representing the main pressure oscillating process. Compared with the single spark ignition, triggering more spark plugs could boost the fuel consumption rate, while shortening the knocking combustion duration and reducing the heat release fraction contributed by auto-ignition. At the same CA50 (9 CAD aTDC), the four spark ignition leads to the least heat release fluctuations than other spark strategies. With advancing the CA50, the heat release fraction produced by knock increases at first then reduces due to the thermodynamic conditions and the flame propagation. Activating two or three spark plugs, the rising rate of the heat release rate goes up, but the knock-induced heat release fraction decreases. Moreover, the primary acoustic resonance mode (1, 0) gives more regular knock vibrations than the mixing form (including mode (1, 0), (0, 1), (2, 0), etc.), the average traveling distance of acoustic wave in the time gap of receiving two continuous signals is very close to the cylinder bore. The results give insights into the pressure wave propagation during knock and the relations between knock conditions, pressure oscillations, and heat release.
dc.description.sponsorshipThis work was funded by competitive research funding from King Abdullah University of Science and Technology (KAUST). The authors appreciate the support from Adrian I. Ichim and Riyad Jambi in the KAUST engine lab during the experiment.
dc.publisherElsevier BV
dc.relation.urlhttps://linkinghub.elsevier.com/retrieve/pii/S0016236121006232
dc.rightsNOTICE: this is the author’s version of a work that was accepted for publication in Fuel. Changes resulting from the publishing process, such as peer review, editing, corrections, structural formatting, and other quality control mechanisms may not be reflected in this document. Changes may have been made to this work since it was submitted for publication. A definitive version was subsequently published in Fuel, [297, , (2021-04-10)] DOI: 10.1016/j.fuel.2021.120746 . © 2021. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/
dc.titleStatistical study on engine knock oscillation and heat release using multiple spark plugs and pressure sensors
dc.typeArticle
dc.contributor.departmentMechanical Engineering Program
dc.contributor.departmentPhysical Science and Engineering (PSE) Division
dc.contributor.departmentMechanical Engineering
dc.contributor.departmentClean Combustion Research Center
dc.identifier.journalFuel
dc.rights.embargodate2023-04-10
dc.eprint.versionPost-print
dc.contributor.institutionState Key Laboratory of Engines, Tianjin University, Tianjin 300072, PR China
dc.identifier.volume297
dc.identifier.pages120746
kaust.personShi, Hao
kaust.personUddeen, Kalim
kaust.personJohansson, Bengt
dc.identifier.eid2-s2.0-85103959896
kaust.acknowledged.supportUnitKAUST engine lab


Files in this item

Thumbnail
Name:
Statistical study on engine knock oscillation and heat release using multiple spark plugs and pressure sensors.pdf
Size:
2.338Mb
Format:
PDF
Description:
Accepted Manuscript
Embargo End Date:
2023-04-10

This item appears in the following Collection(s)

Show simple item record