Ignition delay measurements of straight run naphtha

Abstract
Experiments and surrogate modeling have been preformed to assess the ignition characteristics of naphtha for its use in advance engines. Naphtha, which has low octane number, is proposed as a promising fuel for advanced compression ignition (CI) engines. In this work, Ignition delay times of Haltermann straight run naphtha (HSRN) were measured over wide ranges of pressures (20 and 60 bar), temperatures (620 - 1250 K) and equivalence ratios (0.5, 1 and 2). The naphtha used in this work has research octane number (RON) of 60 and motor octane number (MON) of 58.3. Our experimental data are compared with simulated ignition delay times of three surrogates: primary reference fuel (PRF), toluene primary reference fuel (TPRF), and six-components surrogate. Experimental and simulated ignition delays of the three surrogates show good agreement at high and intermediate temperatures. However, at low temperatures, the multi-component surrogate performs much better than the other two simpler surrogates in capturing the reactivity trends of HSRN.

Acknowledgements
The research reported in this work was supported by Saudi Aramco under the FUELCOM program and by King Abdullah University of Science and Technology (KAUST).

Publisher
Eastern States Section of the Combustion Institute

Conference/Event Name
10th U.S. National Combustion Meeting

Additional Links
https://research.kaust.edu.sa/en/publications/ignition-delay-measurements-of-straight-run-naphtha

Permanent link to this record