Show simple item record

dc.contributor.authorJin Oh, Seung
dc.contributor.authorThu, Kyaw
dc.contributor.authorShahzad, Muhammad Wakil
dc.contributor.authorChun, Wongee
dc.contributor.authorNg, Kim Choon
dc.date.accessioned2021-03-02T11:26:03Z
dc.date.available2021-03-02T11:26:03Z
dc.date.issued2016-01
dc.date.submitted2014-10-02
dc.identifier.citationJin Oh, S., Thu, K., Shahzad, M. W., Chun, W., & Ng, K. C. (2016). Experimental Study of a Laminar Flow Solid Desiccant Dehumidifier Driven by a Low Temperature Heat Source. Applied Mechanics and Materials, 819, 361–365. doi:10.4028/www.scientific.net/amm.819.361
dc.identifier.issn1662-7482
dc.identifier.doi10.4028/www.scientific.net/amm.819.361
dc.identifier.urihttp://hdl.handle.net/10754/667803
dc.description.abstractIn this paper, an experimental study of a laminar flow solid desiccant dehumidifier has been presented. The cyclic steady state performance of adsorption-desorption processes was analyzed at various heat source temperatures and typical ambient humidity conditions in tropics. The desiccant dehumidification system consists of two beds filled with silica gel, two heat exchangers operating at 30 oC and 80 oC respectively, three humidity stations for measurement of the temperature and humidity conditions of the system and a blower to make airflow throughout the system. Type-RD silica gel of 0.3 mm average diameter was used as the working desiccant in the dehumidification system. This system has no moving parts rendering less maintenance compared with a rotary type. It is also energy-efficient means of dehumidification by adsorption process with low temperature heat source as compared to the conventional methods. As a result, it was observed the humidity ratio of inlet air is reduced from 24 g/kg of dry air to about 17 g/kg of dry air. Concomitantly, hot water at 80 oC is used to regenerate the adsorbent.
dc.publisherTrans Tech Publications, Ltd.
dc.relation.urlhttps://www.scientific.net/AMM.819.361
dc.rightsArchived with thanks to Applied Mechanics and Materials
dc.titleExperimental Study of a Laminar Flow Solid Desiccant Dehumidifier Driven by a Low Temperature Heat Source
dc.typeArticle
dc.contributor.departmentBiological and Environmental Science and Engineering (BESE) Division
dc.contributor.departmentWater Desalination and Reuse Research Center (WDRC)
dc.identifier.journalApplied Mechanics and Materials
dc.eprint.versionPost-print
dc.contributor.institutionNational University of Singapore
dc.contributor.institutionJeju National University
dc.identifier.volume819
dc.identifier.pages361-365
kaust.personShahzad, Muhammad Wakil
dc.date.accepted2015-07-16


This item appears in the following Collection(s)

Show simple item record