Show simple item record

dc.contributor.authorNyrenstedt, Gustav
dc.contributor.authorBen Houidi, Moez
dc.contributor.authorBabayev, Rafig
dc.contributor.authorIm, Hong G.
dc.contributor.authorJohansson, Bengt
dc.date.accessioned2021-02-24T06:36:02Z
dc.date.available2021-02-24T06:36:02Z
dc.date.issued2020-12-14
dc.identifier.citationNyrenstedt, G., Ben Houidi, M., Babayev, R., Im, H., & Johansson, B. (2020). Computational Fluid Dynamics Investigation on Multiple Injector Concepts at Different Swirl Ratios in a Heavy Duty Engine. ASME 2020 Internal Combustion Engine Division Fall Technical Conference. doi:10.1115/icef2020-2933
dc.identifier.isbn9780791884034
dc.identifier.doi10.1115/icef2020-2933
dc.identifier.urihttp://hdl.handle.net/10754/667630
dc.description.abstractNumerical studies investigated how multiple injectors can reduce the high heat losses associated with swirl, as a further attempt to enhance thermal efficiencies of high-pressure combustion engines. Computational fluid dynamics simulations employed the Reynolds-averaged Navier-Stokes approach for one, two- and three injector configurations. High and medium load conditions were simulated at different swirl ratios. In general, an increased swirl ratio reduced engine efficiency. However, for all swirl ratios, three injectors provided higher efficiency. Two injectors decreased the heat losses for all swirl ratios, and injection against the swirl with multiple injectors provided high efficiencies. In combination with a waste heat recovery system, the two-injector case delivered an efficiency increase of 2.2%-points for the medium load case. Three injectors delivered high efficiencies at all swirl ratios as an effect of a high flow rate and low heat losses. The multiple injector configurations evaluated in this study proved non-beneficial for the high load case. Spray-to-spray interactions lowered the combustion — and indicated efficiencies. However, the three injector case showed potential for delivering high indicated efficiency, from an increased flow rate, at high loads.
dc.description.sponsorshipThis work was sponsored by King Abdullah University of Science and Technology (KAUST). The simulations in this work were performed with the computing resources at the KAUST Supercomputing Laboratories. The authors would like to thank Dr. Georgios Markomanolis at KAUST Supercomputing Laboratory for helpful guidance in post-processing, and Mr. Nhut Lam at Lund University for providing the experimental data for model validation.
dc.publisherASME International
dc.relation.urlhttps://asmedigitalcollection.asme.org/ICEF/proceedings/ICEF2020/84034/Virtual,%20Online/1092242
dc.rightsArchived with thanks to American Society of Mechanical Engineers
dc.subjectDiesel Engine
dc.subjectSwirl
dc.subjectHigh Efficiency
dc.subjectMultiple Injectors
dc.titleComputational Fluid Dynamics Investigation on Multiple Injector Concepts at Different Swirl Ratios in a Heavy Duty Engine
dc.typeConference Paper
dc.contributor.departmentClean Combustion Research Center
dc.contributor.departmentComputational Reacting Flow Laboratory (CRFL)
dc.contributor.departmentKing Abdullah University of Science and Technology
dc.contributor.departmentMechanical Engineering
dc.contributor.departmentMechanical Engineering Program
dc.contributor.departmentPhysical Science and Engineering (PSE) Division
dc.conference.dateNovember 4-6, 2020
dc.conference.nameInternal Combustion Engine Division Fall Technical Conference ICEF2020
dc.conference.locationVirtual
dc.eprint.versionPre-print
kaust.personNyrenstedt, Gustav
kaust.personBen Houidi, Moez
kaust.personBabayev, Rafig
kaust.personIm, Hong G.
kaust.personJohansson, Bengt
refterms.dateFOA2021-03-18T12:16:52Z
kaust.acknowledged.supportUnitKAUST Supercomputing Laboratories
kaust.acknowledged.supportUnitKAUST Supercomputing Laboratory


Files in this item

Thumbnail
Name:
Final_Manuscript_ASME_GN.pdf
Size:
1.312Mb
Format:
PDF
Description:
Accepted manuscript

This item appears in the following Collection(s)

Show simple item record