Current status of the high-temperature kinetic models of silane: Part II. Oxidation
KAUST DepartmentKing Abdullah University of Science and Technology (KAUST), Clean Combustion Research Center (CCRC), Thuwal, 23955-6900, Saudi Arabia.
Mechanical Engineering Program
Clean Combustion Research Center
Physical Science and Engineering (PSE) Division
KAUST Grant NumberCCF 2019/2020
Embargo End Date2022-12-01
Permanent link to this recordhttp://hdl.handle.net/10754/666269
MetadataShow full item record
AbstractThe present study is the second part of our work on the current status of high-temperature kinetic models of silane. Except Slakman’s model, all the models tested in the first part of the study, restricted to the pyrolysis dataset, are now compared against a large validation dataset (230 conditions) for silane oxidation. This large validation dataset is composed of both new and literature data, mainly representative of the highly-diluted and high-temperature oxidation of silane with different oxidizers ( and NO) and diluents (Ar and ) over an extensive range of temperature ( = [801– 2955 K]) and pressure ( = [50 – 629 kPa]) conditions. The new experimental data are limited to --Ar mixtures, obtained in a double-diaphragm shock tube equipped with an Atomic Resonance Absorption Spectroscopy (ARAS) detection technique. Experimental results present the temporal evolution of the total absorption signal, considering the absorption of O, Si, and . The performance of the models is assessed based on the same five validation criteria and objective function calculation, as presented in the first part of the study. The model of Chatelain and of Mével present good performances with a global error of 2.4, i.e. meaning an average error of 2.4 fold above the experimental uncertainty, and high fraction (70 %) of criteria predicted within two times the experimental uncertainty. Although the reference reaction models performed better on the oxidation dataset compared to the pyrolysis dataset (part I), their global error is still 50 to 125 % higher than the two most accurate reaction models. Rate of production and sensitivity analyses revealed that the origin of the discrepancy of the least performing models can be attributed to the reaction pathways consuming/producing Si and O atoms and to some kinetic rates that must be updated.
CitationChatelain, K. P., He, Y., Javoy, S., Mével, R., Petersen, E. L., & Lacoste, D. A. (2020). Current status of the high-temperature kinetic models of silane: Part II. Oxidation. Combustion and Flame. doi:10.1016/j.combustflame.2020.11.028
SponsorsPartial support was provided by the King Abdullah University of Science and Technology, through the Center Competitive Fund 2019/2020. RM was supported by the 1000 Young Talent of China program. YH was funded by China Postdoctoral Science Foundation (grant number 2019M650674). The authors are gratefull to Mustapha Fikri, Institut für Verbrennung und Gasdynamik, for providing Hans-Juergen Mick’s PhD thesis manuscript. The experimental part of the study was performed at ICARE-CNRS Orléans. The numerical part of the study (simulation and analyses) was jointly performed at KAUST, Tsinghua, and Texas A&M University.
JournalCombustion and Flame