Low-Voltage Low-Noise High-CMRR Biopotential Integrated Preamplifier
Costa-Rauschert, María Cecilia
KAUST DepartmentInstituto de Ingeniería Eléctrica, Universidad de la República, Montevideo 11300, Uruguay. He is now with the King Abdullah University of Science and Technology (KAUST), Thuwal 23955, Saudi Arabia.
Permanent link to this recordhttp://hdl.handle.net/10754/665971
MetadataShow full item record
AbstractThis work presents a novel amplifier architecture which is the input stage of an analog front end targeting the acquisition of biological signals with low voltage supply (1.2 V), low noise, high Common Mode Rejection Ratio (CMRR) and high current efficiency. A prototype, designed and fabricated in a 130 nm CMOS technology, was characterized by simulations and measurements. Our preamplifier presents one of the lowest noise levels reported up-to-date (over the considered bandwidth) while presenting a very competitive performance in other important features. Results from measurements show a bandwidth from 20 Hz to 11 kHz, a CMRR higher than 70 dB, an equivalent input-referred noise as low as 1.3 μVrms. The Noise Efficiency Factor (NEF) at 2.5 and Power Efficiency Factor (PEF) at 7.5 are remarkable results.
CitationCabrera, C., Caballero, R., Costa-Rauschert, M. C., Rossi-Aicardi, C., & Oreggioni, J. (2020). Low-Voltage Low-Noise High-CMRR Biopotential Integrated Preamplifier. IEEE Transactions on Circuits and Systems I: Regular Papers, 1–10. doi:10.1109/tcsi.2020.3035357