Show simple item record

dc.contributor.authorSugar, Antonia
dc.contributor.authorSerag, Maged F.
dc.contributor.authorTorrealba, Victor A.
dc.contributor.authorButtner, Ulrich
dc.contributor.authorHabuchi, Satoshi
dc.contributor.authorHoteit, Hussein
dc.date.accessioned2020-09-16T12:27:45Z
dc.date.available2020-09-16T12:27:45Z
dc.date.issued2020-06-08
dc.identifier.citationSugar, A., Serag, M. F., Torrealba, V. A., Buttner, U., Habuchi, S., & Hoteit, H. (2020). Visualization of Polymer Retention Mechanisms in Porous Media Using Microfluidics. SPE Europec Featured at 82nd EAGE Conference and Exhibition. doi:10.2118/200557-ms
dc.identifier.isbn9781613997123
dc.identifier.doi10.2118/200557-ms
dc.identifier.urihttp://hdl.handle.net/10754/665191
dc.description.abstractUnderstanding polymer transport through porous media is key to successful field implementations,including well conformance control and EOR processes. Polymer retention is typically assessed indirectlythrough its effect on pressure drops and effluent concentrations. Microfluidic techniques representconvenient tools to observe and quantify polymer retention in porous media. In this paper, we demonstratehow a soft-lithography microfluidics protocol can be used to gain insights into polymer transportmechanisms through rocks. The design of the microfluidic chips honors typical pore-size distributions of oil-bearing conventionalreservoir rocks, with pore-Throats ranging from 2 to 10 um. The fabrication technology enables the designtransfer on a silicon wafer substrate using photolithography. The etched wafer holding the negative patternof the pore-network served as a mold for building the microfluidics chip body out of polydimethylsiloxane(PDMS). The oxygen plasma bonding of the PDMS to a thin glass slide resulted in a sealed microfluidic chip,conceptually referred to as "Reservoir-on-A-Chip". We conduct single-phase polymer flooding experimentson the designed chips to understand how polymer-rock interactions impact polymer transport behavior inrocks. These experiments allow for polymer transport visualization at the molecule-scale owing to the useof polymer tagging and single-molecule tracking techniques. This study presents, for the first time, a direct visualization of polymer retention mechanisms in porousmedia. We identified three mechanisms leading to polymer retention: Adsorption, mechanical entrapment,and hydrodynamic retention. Polymer adsorption on the chip surfaces resulted in flow conductivityreduction in specific pathways and complete blockage in others, inducing alterations in the flowpaths. Thismechanism occurred almost instantaneously during the first minutes of flow then, dramatically diminishedas adsorption was satisfied. In addition to static adsorption, flow-induced adsorption (entrapment) wasalso distinguished from the binding of flowing polymer molecules to the already adsorbed polymer layer.Evidence of polymer desorption was observed, which consents with the presumed reversibility character of polymer retention mechanisms. The narrowest channels along with the reduced area due to adsorption,created favorable conditions for polymer entrapment. Both mechanical and hydrodynamic trapped polymerswere successfully imaged. These phenomena led to polymer clogging of the porous network, which is oneof the major concerns for operational aspects of polymer flooding processes. Better understanding and quantification of polymer retention in porous media can help to make betterdecisions related to field-scale implementations of polymer-based processes in the subsurface. In this study,we used a soft-lithography fabrication technique and single-molecule imaging, to show, for the first time,polymer transport insights at the molecule-and pore-scales. This approach opens a new avenue to improveour understanding of the first principals of polymer retention while flowing through porous media.
dc.description.sponsorshipThe authors would like to express gratitude to King Abdullah University of Science & Technology (KAUST) for funding and supporting this work.
dc.publisherSociety of Petroleum Engineers (SPE)
dc.relation.urlhttp://www.onepetro.org/doi/10.2118/200557-MS
dc.rightsArchived with thanks to Society of Petroleum Engineers
dc.titleVisualization of Polymer Retention Mechanisms in Porous Media UsingMicrofluidics
dc.typeConference Paper
dc.contributor.departmentAli I. Al-Naimi Petroleum Engineering Research Center (ANPERC)
dc.contributor.departmentBiological and Environmental Sciences and Engineering (BESE) Division
dc.contributor.departmentBioscience Program
dc.contributor.departmentEnergy Resources & Petroleum Engineering
dc.contributor.departmentEnergy Resources and Petroleum Engineering Program
dc.contributor.departmentKing Abdullah University of Science and Technology
dc.contributor.departmentMicroFluidics
dc.contributor.departmentPhysical Science and Engineering (PSE) Division
dc.contributor.departmentSingle-Molecule Spectroscopy and Microscopy Research Group
dc.conference.date2020-12-08 to 2020-12-11
dc.conference.nameSPE Europec Featured at 82nd EAGE Conference and Exhibition
dc.conference.locationAmsterdam, NLD
dc.eprint.versionPost-print
dc.contributor.institutionChevron Corp.
dc.contributor.institutionNanofabrication Core Lab
kaust.personSugar, Antonia
kaust.personSerag, Maged F.
kaust.personTorrealba, Victor A.
kaust.personButtner, Ulrich
kaust.personHabuchi, Satoshi
kaust.personHoteit, Hussein
dc.identifier.eid2-s2.0-85089661524
refterms.dateFOA2020-09-17T08:55:57Z
dc.date.published-online2020-06-08
dc.date.published-print2020


Files in this item

Thumbnail
Name:
SPE-200557 (1).pdf
Size:
1.468Mb
Format:
PDF
Description:
Accepted manuscript

This item appears in the following Collection(s)

Show simple item record