Show simple item record

dc.contributor.advisorGascon, Jorge
dc.contributor.authorAlahmadi, Faisal
dc.date.accessioned2020-07-26T08:55:56Z
dc.date.available2020-07-26T08:55:56Z
dc.date.issued2020-07
dc.identifier.citationAlahmadi, F. (2020). Development of Iron-based Catalyst for Isobutane Dehydrogenation to Isobutylene. KAUST Research Repository. https://doi.org/10.25781/KAUST-MKUJ8
dc.identifier.doi10.25781/KAUST-MKUJ8
dc.identifier.urihttp://hdl.handle.net/10754/664398
dc.description.abstractAbstract: Isobutylene is a high demand chemical that contributes to the production of fuel, plastic, and rubbers. It is produced industrially by different processes, as a byproduct of steam cracking of naphtha or a fluidized catalytic cracking or by isobutane dehydrogenation. Catalytic dehydrogenation of isobutane is in increasing importance because of the growing demand for isobutylene and the better economic advantage compared to other isobutylene production processes. Isobutane dehydrogenation is an endothermic reaction and to achieve good yields; it is preferred to work at higher temperatures. At these temperatures, carbon deposition leads to catalyst deactivation, which requires the catalyst to be regenerated on a frequent basis. Most of the current processes to produce isobutylene use either expensive platinum-based metal or toxic chromium-based catalysis. Hence, there is a demand to search for alternative catalysts that are a relatively cheap and non-toxic. To achieve this goal, Zirconia-supported Iron catalysts were prepared. To study the effect of active phase distribution, different iron loadings were tested for impregnation (3% to 10%) and co-precipitation (10%-20%). The catalysts show promising results that can achieve an isobutylene selectivity and yield of 91% and 31%, respectively, with isobutane conversion of 35%.
dc.language.isoen
dc.subjectIsobutane dehydrogenation
dc.subjectIron based catalyst
dc.subjectIsobutylene production
dc.subjectCo-precipitation
dc.subjectIncipient wetness impregnation
dc.subjectMTBE
dc.titleDevelopment of Iron-based Catalyst for Isobutane Dehydrogenation to Isobutylene
dc.typeThesis
dc.contributor.departmentPhysical Science and Engineering (PSE) Division
thesis.degree.grantorKing Abdullah University of Science and Technology
dc.contributor.committeememberCastaño, Pedro
dc.contributor.committeememberCavallo, Luigi
thesis.degree.disciplineChemical Engineering
thesis.degree.nameMaster of Science
refterms.dateFOA2020-07-26T08:55:57Z
kaust.request.doiyes


Files in this item

Thumbnail
Name:
iButDH_-_Final_version.pdf
Size:
3.498Mb
Format:
PDF
Description:
Faisal Alahmadi - Final Thesis Paper

This item appears in the following Collection(s)

Show simple item record