Show simple item record

dc.contributor.authorMishra, Rishabh B.
dc.contributor.authorKhan, Sherjeel M.
dc.contributor.authorShaikh, Sohail F.
dc.contributor.authorHussain, Aftab M.
dc.contributor.authorHussain, Muhammad Mustafa
dc.date.accessioned2020-06-24T12:12:03Z
dc.date.available2020-06-24T12:12:03Z
dc.date.issued2020-06-15
dc.identifier.citationMishra, R. B., Khan, S. M., Shaikh, S. F., Hussain, A. M., & Hussain, M. M. (2020). Low-cost foil/paper based touch mode pressure sensing element as artificial skin module for prosthetic hand. 2020 3rd IEEE International Conference on Soft Robotics (RoboSoft). doi:10.1109/robosoft48309.2020.9116035
dc.identifier.isbn978-1-7281-6571-4
dc.identifier.doi10.1109/RoboSoft48309.2020.9116035
dc.identifier.urihttp://hdl.handle.net/10754/663833
dc.description.abstractCapacitive pressure sensors have several advantages in areas such as robotics, automation, aerospace, biomedical and consumer electronics. We present mathematical modelling, finite element analysis (FEA), fabrication and experimental characterization of ultra-low cost and paper-based, touch-mode, flexible capacitive pressure sensor element using Do-It-Yourself (DIY) technology. The pressure sensing element is utilized to design large-area electronics skin for low-cost prosthetic hands. The presented sensor is characterized in normal, transition, touch and saturation modes. The sensor has higher sensitivity and linearity in touch mode operation from 10 to 40 kPa of applied pressure compared to the normal (0 to 8 kPa), transition (8 to 10 kPa) and saturation mode (after 40 kPa) with response time of 15.85 ms. Advantages of the presented sensor are higher sensitivity, linear response, less diaphragm area, less von Mises stress at the clamped edges region, low temperature drift, robust structure and less separation gap for large pressure measurement compared to normal mode capacitive pressure sensors. The linear range of pressure change is utilized for controlling the position of a servo motor for precise movement in robotic arm using wireless communication, which can be utilized for designing skin-like structure for low-cost prosthetic hands.
dc.publisherInstitute of Electrical and Electronics Engineers (IEEE)
dc.relation.urlhttps://ieeexplore.ieee.org/document/9116035/
dc.relation.urlhttps://ieeexplore.ieee.org/document/9116035/
dc.relation.urlhttps://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=9116035
dc.rightsArchived with thanks to IEEE
dc.titleLow-cost foil/paper based touch mode pressure sensing element as artificial skin module for prosthetic hand
dc.typeConference Paper
dc.contributor.departmentComputer, Electrical and Mathematical Sciences and Engineering (CEMSE) Division
dc.contributor.departmentElectrical Engineering Program
dc.contributor.departmentIntegrated Nanotechnology Lab
dc.contributor.departmentKing Abdullah University of Science and Technology (KAUST),MMH Labs, Electrical Engineering,Thuwal,Kingdom of Saudi Arabia,23955-6900
dc.conference.date15 May-15 July 2020
dc.conference.name2020 3rd IEEE International Conference on Soft Robotics (RoboSoft)
dc.conference.locationNew Haven, CT, USA
dc.eprint.versionPre-print
dc.contributor.institutionInternational Institute of Information Technology (IIIT),Center for VLSI and Embedded Systems Technology (CVEST),Hyderabad,Telangana,India,500032
kaust.personMishra, Rishabh B.
kaust.personKhan, Sherjeel
kaust.personShaikh, Sohail F.
kaust.personHussain, Muhammad Mustafa
refterms.dateFOA2020-06-25T05:50:51Z
dc.date.published-online2020-06-15
dc.date.published-print2020-05


Files in this item

Thumbnail
Name:
RoboSoft_2020_RBM.pdf
Size:
1.887Mb
Format:
PDF
Description:
Accepted manuscript

This item appears in the following Collection(s)

Show simple item record