Development of catalysts for ammonia synthesis based on metal phthalocyanine materials
Type
ArticleAuthors
Morlanes, Natalia Sanchez
Almaksoud, Walid
Rai, Rohit Kumar

Ould-Chikh, Samy

Ali, Mohammed M.
Vidjayacoumar, Balamurugan
Al-Sabban, Bedour E.

Albahily, Khalid
Basset, Jean-Marie

KAUST Department
Chemical Science ProgramKAUST Catalysis Center (KCC)
Physical Science and Engineering (PSE) Division
SABIC Corporate Research and Development Center at KAUST, Saudi Basic Industries Corporation Thuwal 23955 Kingdom of Saudi Arabia
Date
2020Submitted Date
2019-11-16Permanent link to this record
http://hdl.handle.net/10754/661947
Metadata
Show full item recordAbstract
Highly efficient and very stable iron and/or cobalt-based catalysts for the ammonia synthesis reaction were synthesized by one-step pyrolysis of metal phthalocyanine precursors. The presence of alkaline earth or alkali metals is found to be essential for accelerating the reaction rate for the ammonia synthesis process. When promoted by alkali metals, the catalysts show a 3-fold increase in their catalytic performance (at 400 °C and 0.1-7 MPa) compared to a commercial benchmark iron-based catalyst, widely used for the Haber-Bosch process. TEM images reveal the local structure of the catalysts obtained upon pyrolysis of the metal phthalocyanine precursor, with metal nanoparticles (5-50 nm) confined in a nitrogen-doped carbon mesoporous matrix, where the alkali metal promoters are located on the top of the iron nanoparticles but also on the carbon support. Finally, kinetic analysis shows a lower activation energy for the Fe phthalocyanine-derived catalyst (42 kJ mol-1) versus 70 kJ mol-1 reported for the iron-benchmark catalyst. Furthermore, this kinetic analysis suggests that the rate-determining step shifts from nitrogen activation to NHx formation, which only few catalysts have achieved.Citation
Morlanés, N., Almaksoud, W., Rai, R. K., Ould-Chikh, S., Ali, M. M., Vidjayacoumar, B., … Basset, J.-M. (2020). Development of catalysts for ammonia synthesis based on metal phthalocyanine materials. Catalysis Science & Technology, 10(3), 844–852. doi:10.1039/c9cy02326gSponsors
This research was supported by the SABIC Company. The authors acknowledge the resources and facilities provided by the King Abdullah University of Science and Technology. The authors also acknowledge the KAUST Analytical Core Lab (ACL) and especially the scientist Mohammed Khalid.Publisher
Royal Society of Chemistry (RSC)Journal
Catalysis Science and TechnologyAdditional Links
http://xlink.rsc.org/?DOI=C9CY02326Gae974a485f413a2113503eed53cd6c53
10.1039/c9cy02326g