Show simple item record

dc.contributor.authorDas, Ratul
dc.contributor.authorArunachalam, Sankara
dc.contributor.authorAhmad, Zain
dc.contributor.authorManalastas, Edelberto
dc.contributor.authorSyed, Ahad
dc.contributor.authorButtner, Ulrich
dc.contributor.authorMishra, Himanshu
dc.date.accessioned2020-09-16T11:59:23Z
dc.date.available2020-03-08T10:28:16Z
dc.date.available2020-09-16T11:59:23Z
dc.date.issued2020-03-01
dc.identifier.citationDas, R., Arunachalam, S., Ahmad, Z., Manalastas, E., Syed, A., Buttner, U., & Mishra, H. (2020). Proof-of-Concept for Gas-Entrapping Membranes Derived from Water-Loving SiO2/Si/SiO2 Wafers for Green Desalination. Journal of Visualized Experiments, (157). doi:10.3791/60583
dc.identifier.doi10.3791/60583
dc.identifier.urihttp://hdl.handle.net/10754/661926
dc.description.abstractDesalination through direct contact membrane distillation (DCMD) exploits water-repellent membranes to robustly separate counterflowing streams of hot and salty seawater from cold and pure water, thus allowing only pure water vapor to pass through. To achieve this feat, commercial DCMD membranes are derived from or coated with water-repellent perfluorocarbons such as polytetrafluoroethylene (PTFE) and polyvinylidene difluoride (PVDF). However, the use of perfluorocarbons is limiting due to their high cost, non-biodegradability, and vulnerability to harsh operational conditions. Unveiled here is a new class of membranes referred to as gas-entrapping membranes (GEMs) that can robustly entrap air upon immersion in water. GEMs achieve this function by their microstructure rather than their chemical make-up. This work demonstrates a proof-of-concept for GEMs using intrinsically wetting SiO2/Si/SiO2 wafers as the model system; the contact angle of water on SiO2 is θo ≈ 40°. Silica-GEMs had 300 μm-long cylindrical pores whose diameters at the (2 μm-long) inlet and outlet regions were significantly smaller; this geometrically discontinuous structure, with 90° turns at the inlets and outlets, is known as the "reentrant microtexture". The microfabrication protocol for silica-GEMs entails designing, photolithography, chrome sputtering, and isotropic and anisotropic etching. Despite the water loving nature of silica, water does not intrude silica-GEMs on submersion. In fact, they robustly entrap air underwater and keep it intact even after six weeks (>106 seconds). On the other hand, silica membranes with simple cylindrical pores spontaneously imbibe water (< 1 s). These findings highlight the potential of the GEMs architecture for separation processes. While the choice of SiO2/Si/SiO2 wafers for GEMs is limited to demonstrating the proof-of-concept, it is expected that the protocols and concepts presented here will advance the rational design of scalable GEMs using inexpensive common materials for desalination and beyond.
dc.description.sponsorshipH.M. acknowledges funding from King Abdullah University of Science and Technology under BAS/1/1070-01-01 and KAUST access to nanofabrication core lab facilities.
dc.publisherMyJove Corporation
dc.relation.urlhttps://www.jove.com/video/60583/proof-concept-for-gas-entrapping-membranes-derived-from-water-loving
dc.rightsArchived with thanks to Journal of Visualized Experiments
dc.titleProof-of-Concept for Gas-Entrapping Membranes Derived from Water-Loving SiO$_{2}$/Si/SiO$_{2}$ Wafers for Green Desalination
dc.typeArticle
dc.identifier.journalJournal of Visualized Experiments
dc.rights.embargodate2020-05-02
dc.eprint.versionPublisher's Version/PDF
pubs.publication-statusPublished
refterms.dateFOA2020-03-08T10:29:29Z


Files in this item

Thumbnail
Name:
jove-protocol-60583-proof-concept-for-gas-entrapping-membranes-derived-f....pdf
Size:
1.031Mb
Format:
PDF
Description:
Published version

This item appears in the following Collection(s)

Show simple item record

VersionItemEditorDateSummary

*Selected version