Rational design of porous nitrogen-doped Ti3C2 MXene as a multifunctional electrocatalyst for Li–S chemistry
KAUST DepartmentChemical Engineering
Chemical Engineering Program
Physical Science and Engineering (PSE) Division
Online Publication Date2020-02-03
Print Publication Date2020-04
Embargo End Date2022-02-03
Permanent link to this recordhttp://hdl.handle.net/10754/661548
MetadataShow full item record
AbstractThe detrimental shuttle effect and retarded sulfur reaction kinetics in lithium–sulfur (Li–S) chemistry mainly lead to inferior electrochemical performances, posing a fatal threat to the practical application of Li–S batteries. Herein, porous N-doped Ti3C2 MXene (P-NTC) has been realized by a scalable sacrificial templating route, resulting in the rational design of active electrocatalyst for Li–S chemistry. Benefiting from the superb electron conductivity, large surface area and strong interaction with lithium polysulfides (LiPSs), P-NTC can trigger the surface-mediated redox reaction of LiPSs. Moreover, the homogenous nitrogen doping on Ti3C2 gives rise to enhanced interfacial interaction with Li atom and lowered dissociation barrier for Li2S. Therefore, the template-derived P-NTC not only acts as an effective LiPS immobilizer but also serves as a multifunctional electrocatalyst to propel the nucleation and decomposition of Li2S in discharge and charge processes, respectively. As expected, thus-fabricated S/P-NTC cathode maintains a low capacity decay of only 0.033% per cycle at 2.0 C over 1200 cycles. In further contexts, our ability to tune the sulfur mass loadings enables fabricated cathodes to harvest a high areal capacity of 9.0 mAh cm−2, holding great promise in future practical applications.
CitationSong, Y., Sun, Z., Fan, Z., Cai, W., Shao, Y., Sheng, G., … Sun, J. (2020). Rational design of porous nitrogen-doped Ti3C2 MXene as a multifunctional electrocatalyst for Li–S chemistry. Nano Energy, 70, 104555. doi:10.1016/j.nanoen.2020.104555
SponsorsThis work was supported by the National Natural Science Foundation of China (51702225 and 21825501), Project of State Key Laboratory of Environment-Friendly Energy Materials (SWUST, Grant No. 19FKSY16), Natural Science Foundation of Jiangsu Province (BK20170336) and China Post-doctoral Foundation (7131705619). The authors acknowledge the support from Suzhou Key Laboratory for Advanced Carbon Materials and Wearable Energy Technologies, Suzhou, China.