Show simple item record

dc.contributor.authorIlyas, Saad
dc.contributor.authorJaber, Nizar
dc.contributor.authorYounis, Mohammad I.
dc.date.accessioned2019-09-30T09:50:09Z
dc.date.available2019-09-30T09:50:09Z
dc.date.issued2017-02-08
dc.identifier.doi10.1115/IMECE2016-66104
dc.identifier.doi10.1115/IMECE201666104
dc.identifier.urihttp://hdl.handle.net/10754/656805
dc.description.abstractAmplifying the signal-to-noise ratio of resonant sensors is vital toward the effort to miniaturize devices into the sub-micro and nano regimes. In this work, we demonstrate theoretically and experimentally amplification through mechanically coupled microbeams. The device is composed of two identical clampedclamped beams, made of polyimide, connected at their middle through a third beam, which acts as a mechanical coupler. Each of the clamped-clamped microbeams and the coupler are designed to be actuated separately, hence providing different possibilities of actuation and sensing. The coupled system is driven into resonance near its first resonance mode and its dynamics is explored via frequency sweeps. The results show significant amplification in the resonator's amplitude when the signal is measured at the midpoint of the coupler, compared to the response of the individual uncoupled beams. The static pullin characteristics of the system are also studied. It is shown that the compliant mechanical coupler can serve as a low-power RF switch actuated at low voltage loads.
dc.description.sponsorshipThis work has been supported through King Abdullah University of Science and Technology (KAUST) research funds.
dc.publisherAmerican Society of Mechanical Engineers (ASME) infocentral@asme.org
dc.relation.urlhttps://asmedigitalcollection.asme.org/IMECE/proceedings/IMECE2016/50640/264654
dc.titleStatic and dynamic amplification using strong mechanical coupling
dc.typeConference Paper
dc.contributor.departmentMechanical Engineering Program
dc.contributor.departmentPhysical Science and Engineering (PSE) Division
dc.conference.date2016-11-11 to 2016-11-17
dc.conference.nameASME 2016 International Mechanical Engineering Congress and Exposition, IMECE 2016
dc.conference.locationPhoenix, AZ, USA
dc.eprint.versionPost-print
kaust.personIlyas, Saad
kaust.personJaber, Nizar
kaust.personYounis, Mohammad I.
dc.date.published-online2017-02-08
dc.date.published-print2016-11-11


This item appears in the following Collection(s)

Show simple item record