Show simple item record

dc.contributor.authorKhan, Zainab
dc.contributor.authorKahin, Kowther
dc.contributor.authorRauf, Sakandar
dc.contributor.authorRamirez Calderon, Gustavo
dc.contributor.authorPapagiannis, Nikolaos
dc.contributor.authorAbdulmajid, Mohammed
dc.contributor.authorHauser, Charlotte
dc.date.accessioned2019-08-18T14:04:11Z
dc.date.available2019-08-18T14:04:11Z
dc.date.issued2018-12-13
dc.identifier.citationKhan, Z., Kahin, K., Rauf, S., Ramirez-Calderon, G., Papagiannis, N., Abdulmajid, M., & Hauser, C. (2018). Optimization of a 3D Bioprinting Process Using Ultrashort Peptide Bioinks. International Journal of Bioprinting, 5(1). doi:10.18063/ijb.v5i1.173
dc.identifier.doi10.18063/ijb.v5i1.173
dc.identifier.urihttp://hdl.handle.net/10754/656488
dc.description.abstractThe field of three-dimensional (3D) bioprinting is rapidly emerging as an additive manufacturing method for tissue and organ fabrication. The demand for tissues and organ transplants is ever increasing, although donors are not as readily available. Consequently, tissue engineering is gaining much attention to alleviate this problem. The process of achieving well-structured 3D bioprinted constructs using hydrogel bioinks depends on symmetrical precision, regulated flow rates, and viability of cells. Even with the mentioned parameters optimized, the printed structures need additional refining by removing excessive liquids, as peptide hydrogel bioprints encapsulate water. However, it is challenging to eliminate the confined fluids without compromising the printing process. In this paper, we introduced a vacuum system to our 3D bioprinting robotic arm and thus optimized the printing quality for complex and refined 3D scaffolds. Moreover, the proposed vacuum system supports printing with cells. Our results show improved printing resolution which facilitates the printing of higher and more stable structures.
dc.description.sponsorshipThe research was supported by funding from King Abdullah University for Science and Technology (KAUST).
dc.publisherWhioce Publishing Pte Ltd
dc.relation.urlhttp://ijb.whioce.com/index.php/int-j-bioprinting/article/view/173
dc.rightsThis work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
dc.rights.urihttp://creativecommons.org/licenses/by-nc/4.0/
dc.subject3D bioprinting
dc.subjectultrashort peptides
dc.subjectbiomaterials
dc.subjectbioinks
dc.subjecttissue engineering
dc.subjectvacuum system
dc.titleOptimization of a 3D bioprinting process using ultrashort peptide bioinks
dc.typeArticle
dc.contributor.departmentBiological and Environmental Sciences and Engineering (BESE) Division
dc.contributor.departmentBioscience Program
dc.contributor.departmentComputational Bioscience Research Center (CBRC)
dc.contributor.departmentEngineering / Metrology
dc.contributor.departmentEnvironmental Science and Engineering Program
dc.contributor.departmentKAUST Catalysis Center (KCC)
dc.contributor.departmentLaboratory for Nanomedicine, Division of Biological and Environmental Science and Engineering, King Abdullah, University of Science and Technology, Thuwal, Saudi Arabia
dc.identifier.journalInternational Journal of Bioprinting
dc.eprint.versionPublisher's Version/PDF
dc.contributor.institutionDepartment of Electrical and Computer Engineering, College of Engineering, Effat University, Jeddah, Saudi Arabia
kaust.personKhan, Zainab
kaust.personKahin, Kowther
kaust.personRauf, Sakandar
kaust.personRamirez Calderon, Gustavo
kaust.personPapagiannis, Nikolaos
kaust.personHauser, Charlotte
refterms.dateFOA2019-08-18T14:04:39Z


Files in this item

Thumbnail
Name:
173-858-1-PB.pdf
Size:
1.156Mb
Format:
PDF
Description:
Published version

This item appears in the following Collection(s)

Show simple item record

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
Except where otherwise noted, this item's license is described as This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.