CMOS-RC Colpitts Oscillator Design Using Floating Fractional-Order Inductance Simulator
KAUST DepartmentComputer, Electrical and Mathematical Sciences and Engineering (CEMSE) Division
Electrical Engineering Program
Permanent link to this recordhttp://hdl.handle.net/10754/652976
MetadataShow full item record
AbstractThis paper deals with CMOS fractional-order inductance (FoL) simulator design and its utilization in 2.75 th order Colpitts oscillator providing high frequency of oscillation. The proposed floating FoL is composed of two unity-gain current followers (CF±s), two inverting voltage buffers, a transconductor, and a fractional-order capacitor (FoC) of order 0.75, while the input intrinsic resistance of CF± is used as design parameter instead of passive resistor. The resulting equivalent inductance value of the FoL can be adjusted via order of FoC, which was emulated via 5 th -order Foster II RC network and values optimized using modified least squares quadratic method. In frequency range 138 kHz - 2.45 MHz the L y shows ±5 degree phase angle deviation. Theoretical results are verified by SPICE simulations using TSMC 0.18 μm level-7 LO EPI SCN018 CMOS process parameters with ±1 V supply voltages.
CitationKartci A, Herencsar N, Brancik L bomir, Salama KN (2018) CMOS-RC Colpitts Oscillator Design Using Floating Fractional-Order Inductance Simulator. 2018 IEEE 61st International Midwest Symposium on Circuits and Systems (MWSCAS). Available: http://dx.doi.org/10.1109/MWSCAS.2018.8623859.
SponsorsThe article is based on work from the COST Action CA15225, a network supported by COST (European Cooperation in Science and Technology). Research described in this paper was financed by the National Sustainability Program under grant no. LO1401 and by the Czech Science Foundation under grant no. 16-06175S. For the research, infrastructure of the SIX Center was used.
Conference/Event name61st IEEE International Midwest Symposium on Circuits and Systems, MWSCAS 2018