Temperature and water measurements in flames using 1064 nm Laser-Induced Grating Spectroscopy (LIGS)
Name:
1-s2.0-S0010218019301610-main.pdf
Size:
1.287Mb
Format:
PDF
Description:
Accepted Manuscript
Embargo End Date:
2021-05-03
Type
ArticleAuthors
De Domenico, FrancescaGuiberti, Thibault
Hochgreb, Simone
Roberts, William L.

Magnotti, Gaetano

KAUST Department
Clean Combustion Research CenterMechanical Engineering Program
Physical Science and Engineering (PSE) Division
high-pressure combustion (HPC) Research Group
Date
2019-05-03Online Publication Date
2019-05-03Print Publication Date
2019-07Permanent link to this record
http://hdl.handle.net/10754/652838
Metadata
Show full item recordAbstract
Laser-Induced Grating Spectroscopy (LIGS) is applied to premixed CH4/air laminar flat flames under operating pressures of 1 to 6 bar. For the first time, temperature and water concentration have been acquired simultaneously in a reacting flow environment using LIGS. A 1064 nm pulsed laser is used as pump to generate a temporary stationary intensity grating in the probe volume. Water molecules in the flame products absorb the laser energy and generate a thermal grating if sufficiently high energies are delivered by the laser pulses, here more than 100 mJ per pulse. Such energies allow the electric field to polarize the dielectric medium, resulting in a detectable electrostrictive grating as well. This creates LIGS signals containing both the electrostrictive and the thermal contributions. The local speed of sound is derived from the oscillation frequency of LIGS signals, which can be accurately measured from the single shot power spectrum. Data show that the ratio between the electrostrictive and the thermal peak intensities is an indicator of the local water concentration. The measured values of speed of sound, temperature, and water concentration in the flames examined compare favorably with flame simulations with Chemkin, showing an estimated accuracy of 0.5 to 2.5% and a precision of 1.4–2%. These results confirm the potential for 1064 nm LIGS-based thermometry for high-precision temperature measurements of combustion processes.Citation
De Domenico F, Guiberti TF, Hochgreb S, Roberts WL, Magnotti G (2019) Temperature and water measurements in flames using 1064 nm Laser-Induced Grating Spectroscopy (LIGS). Combustion and Flame 205: 336–344. Available: http://dx.doi.org/10.1016/j.combustflame.2019.04.016.Sponsors
The research reported in this publication was supported by funding from King Abdullah University of Science and Technology (KAUST). Francesca De Domenico's internship at KAUST University was fully founded by the KAUST Visiting Students Program. Francesca De Domenico is supported by the Honorary Vice-Chancellor's Award and a Qualcomm/ DTA Studentship (University of Cambridge). The authors are grateful to Dr. Benjamin A. O. Williams and Prof. Paul Ewart for valuable advice, developed under a previous EPSRC project EP/K02924X. The help of Anthony Bennet with the pressure vessel was highly appreciated.Publisher
Elsevier BVJournal
Combustion and FlameAdditional Links
https://www.sciencedirect.com/science/article/pii/S0010218019301610ae974a485f413a2113503eed53cd6c53
10.1016/j.combustflame.2019.04.016