Embargo End Date:
Microsoft Word 2007
Embargo End Date:
Alshareef, Husam N.
KAUST DepartmentFunctional Nanomaterials and Devices Research Group
Material Science and Engineering Program
Physical Science and Engineering (PSE) Division
KAUST Grant NumberURF/1/2963-01-01
Online Publication Date2019-04-26
Print Publication Date2019-07
Permanent link to this recordhttp://hdl.handle.net/10754/644880
MetadataShow full item record
AbstractSolution processable two-dimensional transition metal carbides, commonly known as MXenes, have drawn much interest due to their diverse optoelectronic, electrochemical and other useful properties. These properties have been exploited to develop thin and optically transparent microsupercapacitors. However, color changing MXene-based microsupercapacitors have not been explored. In this study, we developed titanium carbide--poly(3,4-ethylenedioxythiophene) (PEDOT) heterostructures by electrochemical deposition using a non-aqueous monomeric electrolytic bath. Planar electrodes of such hybrid films were carved directly using an automated scalpel technique. Hybrid microsupercapacitors showed five-fold areal capacitance and higher rate capabilities (2.4 mF cm−2 at 10 mV s−1, retaining 1.4 mF cm−2 at 1000 mV s−1) over the pristine MXene microsupercapacitors (455 μF cm−2 at 10 mV s−1, 120 μF cm−2 at 1000 mV s−1). Furthermore, the electrochromic behavior of PEDOT/Ti3C2Tx microsupercapacitors was investigated using in-situ UV–vis and resonant Raman spectroscopies. A high-rate color switch between a deep blue and colorless state is achieved on both electrodes in the voltage range of −0.6 to 0.6 V, with switching times of 6.4 and 5.5 s for bleaching and coloration, respectively. This study opens new avenues for developing electrochromic energy storage devices based on MXene heterostructures.
CitationLi J, Levitt A, Kurra N, Juan K, Noriega N, et al. (2019) MXene-conducting polymer electrochromic microsupercapacitors. Energy Storage Materials. Available: http://dx.doi.org/10.1016/j.ensm.2019.04.028.
SponsorsAuthors acknowledge the Core Research Facilities (CRF) at Drexel University for providing access to characterization tools. J. L. acknowledges support through the Fundamental Research Funds for the Central Universities (CUSF-DH-D-2017028) and the Special Excellent Ph.D. International Visit Program by Donghua University. K. J. thanks Prof. Leslie Lamberson and Steve Pagano for organizing the IExE REU at Drexel. A. L. was supported by the National Science Foundation Graduate Research Fellowship under Grant No. DGE-1646737. Research reported in this publication was supported by King Abdullah University of Science and Technology (KAUST) under the KAUST-Drexel Competitive Research Grant (URF/1/2963-01-01).
JournalEnergy Storage Materials