Show simple item record

dc.contributor.authorShamim, Atif
dc.contributor.authorVaseem, Mohammad
dc.contributor.authorSizhe, An
dc.contributor.authorFarooqui, Muhammad Fahad
dc.date.accessioned2019-02-18T08:03:26Z
dc.date.available2019-02-18T08:03:26Z
dc.date.issued2019-01-09
dc.identifier.citationShamim A, Vaseem M, Sizhe A, Farooqui MF (2018) Additively Manufactured Flexible and Stretchable Antenna Systems for Wearable Applications. 2018 International Flexible Electronics Technology Conference (IFETC). Available: http://dx.doi.org/10.1109/IFETC.2018.8583944.
dc.identifier.doi10.1109/IFETC.2018.8583944
dc.identifier.urihttp://hdl.handle.net/10754/631080
dc.description.abstractEmerging applications such as Internet of things (IoT) and wearable sensors require new kind of electronics that can be bent, stretched, worn, washed, etc. These electronics must be extremely low cost, to the extent that they become disposable. The flexibility and low-cost aspects can be addressed by using additive manufacturing techniques, such as inkjet and screen printing on light-weight and flexible substrates like paper or plastics. However, the best solution for wearable electronics is to print them directly on textiles. Though, the driving electronics are still predominantly realized in standard CMOS platforms but all the remaining parts of these systems, such as sensors, antennas, interconnects, etc, that are large and expensive to realize on CMOS, can be printed. These could be integrated with CMOS chips to demonstrate system level wearable examples. This paper will show some examples of such flexible and stretchable components and systems that have been realized through additive manufacturing. Performance issues under flexed and stretched conditions are discussed. The promising results of these designs indicate that the day when electronics can be printed like newspapers and magazines through roll-to-roll and reel-to-reel printing is not far away.
dc.publisherInstitute of Electrical and Electronics Engineers (IEEE)
dc.relation.urlhttps://ieeexplore.ieee.org/document/8583944
dc.rightsArchived with thanks to 2018 International Flexible Electronics Technology Conference (IFETC)
dc.subjectAdditive manufacturing
dc.subjectFlexible electronics
dc.subjectInkjet printing
dc.subjectWearable electronics
dc.titleAdditively Manufactured Flexible and Stretchable Antenna Systems for Wearable Applications
dc.typeConference Paper
dc.contributor.departmentComputer, Electrical and Mathematical Sciences and Engineering (CEMSE) Division
dc.contributor.departmentElectrical Engineering Program
dc.identifier.journal2018 International Flexible Electronics Technology Conference (IFETC)
dc.conference.date2018-08-07 to 2018-08-09
dc.conference.name2018 International Flexible Electronics Technology Conference, IFETC 2018
dc.conference.locationOttawa, ON, CAN
dc.eprint.versionPost-print
kaust.personShamim, Atif
kaust.personVaseem, Mohammad
kaust.personSizhe, An
kaust.personFarooqui, Muhammad Fahad
refterms.dateFOA2019-02-18T08:05:57Z
dc.date.published-online2019-01-09
dc.date.published-print2018-08


Files in this item

Thumbnail
Name:
Additively Manufactured Flexible and Stretchable Antenna Systems for Wearable Applications.pdf
Size:
525.1Kb
Format:
PDF
Description:
Accepted Manuscript

This item appears in the following Collection(s)

Show simple item record