A Comparative Study of Interdigitated Electrode and Quartz Crystal Microbalance Transduction Techniques for Metal–Organic Framework-Based Acetone Sensors
AuthorsNanaiah, Karumbaiah Chappanda
Surya, Sandeep Goud
Salama, Khaled N.
KAUST DepartmentAdvanced Membranes and Porous Materials Research Center
Chemical Science Program
Computer, Electrical and Mathematical Sciences and Engineering (CEMSE) Division
Electrical Engineering Program
Functional Materials Design, Discovery and Development (FMD3)
Physical Science and Engineering (PSE) Division
KAUST Grant NumberFCC/1/1972-05-01
Permanent link to this recordhttp://hdl.handle.net/10754/629872
MetadataShow full item record
AbstractWe present a comparative study of two types of sensor with different transduction techniques but coated with the same sensing material to determine the effect of the transduction mechanism on the sensing performance of sensing a target analyte. For this purpose, interdigitated electrode (IDE)-based capacitors and quartz crystal microbalance (QCM)-based resonators were coated with a zeolitic⁻imidazolate framework (ZIF-8) metal⁻organic framework thin films as the sensing material and applied to the sensing of the volatile organic compound acetone. Cyclic immersion in methanolic precursor solutions technique was used for depositing the ZIF-8 thin films. The sensors were exposed to various acetone concentrations ranging from 5.3 to 26.5 vol % in N₂ and characterized/compared for their sensitivity, hysteresis, long-term and short-term stability, selectivity, detection limit, and effect of temperature. Furthermore, the IDE substrates were used for resistive transduction and compared using capacitive transduction.
CitationChappanda KN, Tchalala MR, Shekhah O, Surya SG, Eddaoudi M, et al. (2018) A Comparative Study of Interdigitated Electrode and Quartz Crystal Microbalance Transduction Techniques for Metal–Organic Framework-Based Acetone Sensors. Sensors 18: 3898. Available: http://dx.doi.org/10.3390/s18113898.
SponsorsThis work was partially funded by the Advanced Membranes and Porous Materials Center (AMPMC)’s grant FCC/1/1972-05-01 within the “Stimuli Responsive Materials” thrust.
CollectionsArticles; Advanced Membranes and Porous Materials Research Center; Physical Science and Engineering (PSE) Division; Functional Materials Design, Discovery and Development (FMD3); Electrical and Computer Engineering Program; Chemical Science Program; Sensors Lab; Computer, Electrical and Mathematical Science and Engineering (CEMSE) Division
Except where otherwise noted, this item's license is described as This is an open access article distributed under the Creative Commons Attribution License which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited (CC BY 4.0).