MXene Electrochemical Microsupercapacitor Integrated with Triboelectric Nanogenerator as a Wearable Self-charging Power Unit
Embargo End Date:
Microsoft Word 2007
Embargo End Date:
Wang, Aurelia Chi
Wang, Zhong Lin
Alshareef, Husam N.
KAUST DepartmentPhysical Sciences and Engineering (PSE) Division
Materials Science and Engineering Program
Computer, Electrical and Mathematical Sciences and Engineering (CEMSE) Division
Electrical Engineering Program
KAUST Solar Center (KSC)
Permanent link to this recordhttp://hdl.handle.net/10754/626875
MetadataShow full item record
AbstractThe development of miniaturized, wearable, and implantable electronics has increased the demand for small stand-alone power modules that have steady output and long life-time. Given the limited capacity of energy storage devices, one promising solution is to integrate energy harvesting and storage materials to efficiently convert ambient mechanical energy to electricity for direct use or to store the harvested energy by electrochemical means. Here, a highly compact self-charging power unit is proposed by integrating triboelectric nanogenerator with MXene-based microsupercapacitors in a wearable and flexible harvester-storage module. The device can utilize and store the random energy from human activities in a standby mode and provide power to electronics when active. As a result, our microsupercapacitor delivers a capacitance of 23 mF/cm with 95% capacitance retention after 10,000 charge-discharge cycles, while the triboelectric nanogenerator exhibits a maximum output power of 7.8 µW/cm. Given the simplicity and compact nature, our device can be integrated with a variety of electronic devices and sensors.
CitationJiang Q, Wu C, Wang Z, Wang AC, He J-H, et al. (2018) MXene Electrochemical Microsupercapacitor Integrated with Triboelectric Nanogenerator as a Wearable Self-charging Power Unit. Nano Energy. Available: http://dx.doi.org/10.1016/j.nanoen.2018.01.004.
SponsorsThanks to Jiyu Wang and Peng Zhang for technical help. Research reported in this publication was supported by King Abdullah University of Science and Technology (KAUST) under the Sensors Initiative. Authors thank Advanced Nanofabrication, Imaging and Characterization Laboratory at KAUST for their excellent support.