Show simple item record

dc.contributor.authorHafiz, Md Abdullah Al
dc.contributor.authorTella, Sherif Adekunle
dc.contributor.authorAlcheikh, Nouha
dc.contributor.authorFariborzi, Hossein
dc.contributor.authorYounis, Mohammad I.
dc.date.accessioned2018-01-15T06:35:08Z
dc.date.available2018-01-15T06:35:08Z
dc.date.issued2017-11-03
dc.identifier.citationHafiz MAA, Tella S, Alcheikh N, Fariborzi H, Younis MI (2017) Axially Modulated Clamped-Guided Arch Resonator for Memory and Logic Applications. Volume 4: 22nd Design for Manufacturing and the Life Cycle Conference; 11th International Conference on Micro- and Nanosystems. Available: http://dx.doi.org/10.1115/detc2017-68284.
dc.identifier.doi10.1115/detc2017-68284
dc.identifier.urihttp://hdl.handle.net/10754/626779
dc.description.abstractWe experimentally demonstrate memory and logic devices based on an axially modulated clamped-guided arch resonator. The device are electrostatically actuated and capacitively sensed, while the resonance frequency modulation is achieved through an axial electrostatic force from the guided side of the clamped-guided arch microbeam. We present two case studies: first, a dynamic memory based on the nonlinear frequency response of the resonator, and second, a reprogrammable two-input logic gate based on the linear frequency modulation of the resonator. These devices show energy cost per memory/logic operation in pJ, are fully compatible with CMOS fabrication processes, have the potential for on-chip system integration, and operate at room temperature.
dc.publisherASME International
dc.relation.urlhttp://proceedings.asmedigitalcollection.asme.org/proceeding.aspx?articleid=2662164
dc.subjectAxial stress modulation
dc.subjectClamped-guided arch resonator
dc.subjectElectromechanical computation
dc.subjectMechanical memory
dc.titleAxially Modulated Clamped-Guided Arch Resonator for Memory and Logic Applications
dc.typeConference Paper
dc.contributor.departmentPhysical Sciences and Engineering (PSE) Division
dc.contributor.departmentMechanical Engineering Program
dc.contributor.departmentComputer, Electrical and Mathematical Sciences and Engineering (CEMSE) Division
dc.contributor.departmentElectrical Engineering Program
dc.identifier.journalVolume 4: 22nd Design for Manufacturing and the Life Cycle Conference; 11th International Conference on Micro- and Nanosystems
dc.conference.date2017-08-06 to 2017-08-09
dc.conference.nameASME 2017 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, IDETC/CIE 2017
dc.conference.locationCleveland, OH, USA
kaust.personHafiz, Md Abdullah Al
kaust.personTella, Sherif Adekunle
kaust.personAlcheikh, Nouha
kaust.personFariborzi, Hossein
kaust.personYounis, Mohammad I.
dc.date.published-online2017-11-03
dc.date.published-print2017-08-06


This item appears in the following Collection(s)

Show simple item record