Show simple item record

dc.contributor.authorRuzziconi, Laura
dc.contributor.authorJaber, Nizar
dc.contributor.authorKosuru, Lakshmoji
dc.contributor.authorBellaredj, Mohammed Lamine Faycal
dc.contributor.authorLenci, Stefano
dc.contributor.authorYounis, Mohammad I.
dc.date.accessioned2018-01-15T06:35:08Z
dc.date.available2018-01-15T06:35:08Z
dc.date.issued2017-11-03
dc.identifier.citationRuzziconi L, Jaber N, Kosuru L, Bellaredj ML, Lenci S, et al. (2017) An Electrically Actuated Microbeam-Based MEMS Device: Experimental and Theoretical Investigation. Volume 6: 13th International Conference on Multibody Systems, Nonlinear Dynamics, and Control. Available: http://dx.doi.org/10.1115/detc2017-67579.
dc.identifier.doi10.1115/detc2017-67579
dc.identifier.urihttp://hdl.handle.net/10754/626778
dc.description.abstractThe present paper deals with the dynamic behavior of a microelectromechanical systems (MEMS). The device consists of a clamped-clamped microbeam electrostatically and electrodynamically actuated. Our objective is to develop a theoretical analysis, which is able to describe and predict all the main relevant aspects of the experimental response. In the first part of the paper an extensive experimental investigation is conducted. The microbeam is perfectly straight. The first three experimental natural frequencies are identified and the nonlinear dynamics are explored at increasing values of electrodynamic excitation. Several backward and forward frequency sweeps are acquired. The nonlinear behavior is highlighted. The experimental data show the coexistence of the nonresonant and the resonant branch, which perform a bending toward higher frequencies values before undergoing jump or pull-in dynamics. This kind of bending is not particularly common in MEMS. In the second part of the paper, a theoretical single degree-of-freedom model is derived. The unknown parameters are extracted and settled via parametric identification. A single mode reduced-order model is considered, which is obtained via the Galerkin technique. To enhance the computational efficiency, the contribution of the electric force term is computed in advance and stored in a table. Extensive numerical simulations are performed at increasing values of electrodynamic excitation. They are observed to properly predict all the main nonlinear features arising in the device response. This occurs not only at low values of electrodynamic excitation, but also at higher ones
dc.description.sponsorshipThis work has been partly developed during Laura Ruzziconi’s stay at the King Abdullah University of Science and Technology (KAUST), Saudi Arabia. The kind hospitality is gratefully acknowledged. Laura Ruzziconi would like to thank KAUST for promoting and financially supporting the exchange collaboration. Mohammad I. Younis acknowledges KAUST funding to support this project.
dc.publisherASME International
dc.relation.urlhttp://proceedings.asmedigitalcollection.asme.org/proceeding.aspx?articleid=2662370
dc.titleAn Electrically Actuated Microbeam-Based MEMS Device: Experimental and Theoretical Investigation
dc.typeConference Paper
dc.contributor.departmentMechanical Engineering Program
dc.contributor.departmentPhysical Science and Engineering (PSE) Division
dc.identifier.journalVolume 6: 13th International Conference on Multibody Systems, Nonlinear Dynamics, and Control
dc.conference.date2017-08-06 to 2017-08-09
dc.conference.nameASME 2017 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, IDETC/CIE 2017
dc.conference.locationCleveland, OH, USA
dc.contributor.institutionPolytechnic University of Marche, Ancona, Italy
kaust.personJaber, Nizar
kaust.personKosuru, Lakshmoji
kaust.personBellaredj, Mohammed Lamine Faycal
kaust.personYounis, Mohammad I.
dc.date.published-online2017-11-03
dc.date.published-print2017-08-06


This item appears in the following Collection(s)

Show simple item record