Hybrid van der Waals SnO/MoS2 Heterojunctions for Thermal and Optical Sensing Applications
KAUST DepartmentMaterials Science and Engineering Program
Physical Sciences and Engineering (PSE) Division
KAUST Grant NumberREP/1/2719-01
Online Publication Date2017-11-10
Print Publication Date2017-12
Permanent link to this recordhttp://hdl.handle.net/10754/626639
MetadataShow full item record
AbstractEmerging van der Waals heterojunctions (vdWH) containing 2D materials have shown exciting functionalities that surpass those of traditional devices based on bulk materials. In this Communication, a report on the properties of a 2D sulfide/oxide hybrid vdWH based on n-type molybdenum disulfide (MoS2) and p-type tin monoxide (SnO) is presented, with promising rectification, thermal-sensing, and photosensing performance. Specifically, the hybrid SnO/MoS2 vdWH shows static rectification ratio of 2 × 102 with ideality factor of 2.3, and can operate at 100 Hz with good stability. The vdWH shows good temperature stability with reversible and reproducible current levels up to 110 °C, indicating its potential for thermal sensing applications. The sensitivity of current variation is calculated to be 0.0144 dec °C−1. Finally, maximum responsivity of 8.17 mA W−1 and external quantum efficiency of 2.14% have been achieved in photovoltaic measurements. The results suggest that MoS2–SnO hybrid vdWH are promising for various sensing applications.
CitationWang Z, He X, Zhang X-X, Alshareef HN (2017) Hybrid van der Waals SnO/MoS2 Heterojunctions for Thermal and Optical Sensing Applications. Advanced Electronic Materials 3: 1700396. Available: http://dx.doi.org/10.1002/aelm.201700396.
SponsorsZ.W. and X.H. contributed equally to this work. H.N.A. and X.X.Z. designed the work. X.H. acknowledges the financial support by KAUST sensor project (REP/1/2719-01). Research reported in this publication was supported by King Abdullah University of Science and Technology (KAUST).
JournalAdvanced Electronic Materials