KAUST DepartmentComputer, Electrical and Mathematical Sciences and Engineering (CEMSE) Division
Electrical Engineering Program
Integrated Microwave Packaging Antennas and Circuits Technology (IMPACT) Lab
Permanent link to this recordhttp://hdl.handle.net/10754/626617
MetadataShow full item record
AbstractIn this paper, we propose an on-package dual band monopole antenna with near-isotropic radiation pattern for GSM mobile applications. The proposed antenna is well matched for both GSM 900 and 1800 bands and provides decent gain for both the bands (1.67 and 3.27 dBi at 900 MHz and 1800 MHz respectively). The antenna is printed with silver ink on a 3D printed polymer based package. The package houses the GSM electronics and the battery. By optimizing the antenna arms width and length, a near-isotropic radiation pattern is achieved. Unlike the published isotropic antennas which are either single band or large in size, the proposed antenna covers both GSM bands with required bandwidth and is only half wavelength long. The design is low cost and highly suitable for various GSM applications such as localization, in additional to conventional communication applications.
CitationZhen S, Shamim A (2017) A 3D printed dual GSM band near isotropic on-package antenna. 2017 IEEE International Symposium on Antennas and Propagation & USNC/URSI National Radio Science Meeting. Available: http://dx.doi.org/10.1109/apusncursinrsm.2017.8072668.
Journal2017 IEEE International Symposium on Antennas and Propagation & USNC/URSI National Radio Science Meeting