Show simple item record

dc.contributor.authorBahri, Meznan
dc.contributor.authorHussain, Muhammad Mustafa
dc.contributor.authorBrahimi, Tayeb
dc.contributor.authorDahrouj, Hayssam
dc.date.accessioned2017-11-01T06:42:47Z
dc.date.available2017-11-01T06:42:47Z
dc.date.issued2017-10-31
dc.identifier.citationBahri M, Hussain MM, Brahimi T, Dahrouj H (2017) FDM 3D printed coffee glove embedded with flexible electronic. 2017 Learning and Technology Conference (L&T) - The MakerSpace: from Imagining to Making! Available: http://dx.doi.org/10.1109/LT.2017.8088126.
dc.identifier.doi10.1109/LT.2017.8088126
dc.identifier.urihttp://hdl.handle.net/10754/626070
dc.description.abstractWith the advances in 3D printing technology, Flexible Electronics can now be exploited to form the so-called “Embedded Electronics”. This paper describes experiences learned from a research project which ran during summer 2016 at KAUST, in collaboration with the Electrical and Computer Engineering Department at Effat University, and aimed at creating a heating coffee glove product operating on double alkaline batteries using Kapton© as a flexible substrate for the circuit. The circuit and its batteries are encapsulated in a 3D printed glove, designed using SolidWorks©. The proposed methodology and techniques applied during this work could be further used in implementing other technologies, such as thermoelectric coolers head patches, smart garments, and flexible smartphones. Limitation and recommendation of the present methodology are also discussed.
dc.description.sponsorshipThe present project was prepared under the collaboration of KAUST and the Electrical and Computer Engineering Department at Effat University. The authors gratefully acknowledge their support and express their deepest thanks to KAUST for arranging all facilities to complete this project.
dc.publisherInstitute of Electrical and Electronics Engineers (IEEE)
dc.relation.urlhttp://ieeexplore.ieee.org/document/8088126/
dc.rights(c) 2017 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other users, including reprinting/ republishing this material for advertising or promotional purposes, creating new collective works for resale or redistribution to servers or lists, or reuse of any copyrighted components of this work in other works.
dc.subjectFlexible electronics
dc.subjectHeating systems
dc.subjectInk
dc.subjectPrinters
dc.subjectSilver
dc.subjectThree-dimensional displays
dc.subjectThree-dimensional printing
dc.titleFDM 3D printed coffee glove embedded with flexible electronic
dc.typeConference Paper
dc.contributor.departmentComputer, Electrical and Mathematical Sciences and Engineering (CEMSE) Division
dc.contributor.departmentElectrical Engineering Program
dc.identifier.journal2017 Learning and Technology Conference (L&T) - The MakerSpace: from Imagining to Making!
dc.eprint.versionPost-print
dc.contributor.institutionECE Department, Effat University Jeddah, Saudi Arabia
kaust.personHussain, Muhammad Mustafa
refterms.dateFOA2018-06-13T09:42:03Z
dc.date.published-online2017-10-31
dc.date.published-print2017-02


Files in this item

Thumbnail
Name:
Meznan et al - L&T 2017.pdf
Size:
433.6Kb
Format:
PDF
Description:
Accepted Manuscript

This item appears in the following Collection(s)

Show simple item record