KAUST DepartmentComputer, Electrical and Mathematical Sciences and Engineering (CEMSE) Division
Electrical Engineering Program
Comp., Elect. and Math. Science and Engineering Division, King Abdullah Uni. of Science and Technology (KAUST), Thuwal, 23955 Saudi Arabia
KAUST Grant NumberKAUST-002
Permanent link to this recordhttp://hdl.handle.net/10754/626055
MetadataShow full item record
AbstractIn this work, a beam switched antenna system based on a planar connected antenna array (CAA) is proposed at 28 GHz for 5G applications. The antenna system consists of a 4 × 4 connected slot antenna elements. It is covering frequency band from 27.4 GHz to 28.23 GHz with at least −10dB bandwidth of 830 MHz. It is modeled on a commercially available RO3003 substrate with ∊<inf>r</inf> equal to 3.3. The dimensions of the board are equal to 61×54×0.13 mm<sup>3</sup>. The proposed design is compact and low profile. A Butler matrix based feed network is used to steer the beam at different locations.
CitationIkram M, Sharawi MS, Shamim A (2017) A millimeter-wave connected antenna array for 5G applications. 2017 IEEE International Symposium on Antennas and Propagation & USNC/URSI National Radio Science Meeting. Available: http://dx.doi.org/10.1109/APUSNCURSINRSM.2017.8072767.
SponsorsThis work was supported by DSR-KFUPM under project number KAUST-002.
Journal2017 IEEE International Symposium on Antennas and Propagation & USNC/URSI National Radio Science Meeting