Show simple item record

dc.contributor.authorShaqura, Mohammad
dc.contributor.authorShamma, Jeff S.
dc.date.accessioned2017-10-10T05:52:01Z
dc.date.available2017-10-10T05:52:01Z
dc.date.issued2017-08-29
dc.identifier.citationShaqura M, Shamma JS (2017) A novel gripper design for multi hand tools grasping under tight clearance constraints and external torque effect. 2017 IEEE International Conference on Mechatronics and Automation (ICMA). Available: http://dx.doi.org/10.1109/icma.2017.8015925.
dc.identifier.doi10.1109/icma.2017.8015925
dc.identifier.urihttp://hdl.handle.net/10754/625844
dc.description.abstractA robotic multi tool gripper design and implementation is presented in this paper. The proposed design targets applications where an actuation task is performed using a wide selection of standard hand tools. The manipulation motion is assumed to be rotational which requires a firm grip to account for external torque on the grasped tool. The setup is assumed to be a conventional workshop panel with hand tools being hanged close to each other, which constraints lateral clearance around the target, and near the wall of the panel, which constraints the depth clearance. Off the shelf grippers are mostly heavy and bulky which make them unsuitable for these requirements. Moreover, they are not optimized in terms of power consumption, simplicity and compactness. These generic grippers are mostly designed for pick and place tasks where no external torques other than those caused by the object weight affects the gripper. The design challenge involves building a gripper that is capable of operating in limited clearance space, firmly grip a variety of standard hand tools with different sizes and shapes. The proposed design is optimized for these objectives and offers a low cost and power consumption solution. The design has been validated in lab and outdoor experiments and has been deployed in real operating platform used in an international robotics competition.
dc.description.sponsorshipThe authors would like to thank Dr. Samet Guler (Postdoctoral fellow, KAUST) and Mr. Mohammed AlGarni (PhD student, KAUST) for their valuable feedback throughout the design and implementation of the presented work.
dc.publisherInstitute of Electrical and Electronics Engineers (IEEE)
dc.relation.urlhttp://ieeexplore.ieee.org/document/8015925/
dc.rights(c) 2017 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other users, including reprinting/ republishing this material for advertising or promotional purposes, creating new collective works for resale or redistribution to servers or lists, or reuse of any copyrighted components of this work in other works.
dc.subjectRobotic gripper
dc.subjectAutonomous manipulation
dc.subjectSelf adjusting mechanism
dc.subjectAdaptive design
dc.titleA novel gripper design for multi hand tools grasping under tight clearance constraints and external torque effect
dc.typeConference Paper
dc.contributor.departmentComputer, Electrical and Mathematical Sciences and Engineering (CEMSE) Division
dc.contributor.departmentElectrical Engineering Program
dc.contributor.departmentMechanical Engineering Program
dc.contributor.departmentPhysical Science and Engineering (PSE) Division
dc.contributor.departmentRISC Laboratory
dc.identifier.journal2017 IEEE International Conference on Mechatronics and Automation (ICMA)
dc.eprint.versionPost-print
kaust.personShaqura, Mohammad
kaust.personShamma, Jeff S.
refterms.dateFOA2018-06-13T18:37:31Z
dc.date.published-online2017-08-29
dc.date.published-print2017-08


Files in this item

Thumbnail
Name:
icma_v6.pdf
Size:
1.701Mb
Format:
PDF
Description:
Accepted Manuscript

This item appears in the following Collection(s)

Show simple item record