Show simple item record

dc.contributor.authorRodríguez-Martínez, Xabier
dc.contributor.authorVezie, Michelle S
dc.contributor.authorShi, Xingyuan
dc.contributor.authorMcCulloch, Iain
dc.contributor.authorNelson, Jenny
dc.contributor.authorGoni, Alejandro R
dc.contributor.authorCampoy-Quiles, Mariano
dc.date.accessioned2017-07-19T10:45:03Z
dc.date.available2017-07-19T10:45:03Z
dc.date.issued2017-07-06
dc.identifier.citationRodríguez-Martínez X, Vezie MS, Shi X, McCulloch I, Nelson J, et al. (2017) Quantifying local thickness and composition in thin films of organic photovoltaic blends by Raman scattering. J Mater Chem C. Available: http://dx.doi.org/10.1039/c7tc01472d.
dc.identifier.issn2050-7526
dc.identifier.issn2050-7534
dc.identifier.doi10.1039/c7tc01472d
dc.identifier.urihttp://hdl.handle.net/10754/625228
dc.description.abstractWe report a methodology based on Raman spectroscopy that enables the non-invasive and fast quantitative determination of local thickness and composition in thin films (from few monolayers to hundreds of nm) of one or more components. We apply our methodology to blends of organic conjugated materials relevant in the field of organic photovoltaics. As a first step, we exploit the transfer-matrix formalism to describe the Raman process in thin films including reabsorption and interference effects of the incoming and scattered electric fields. This allows determining the effective solid-state Raman cross-section of each material by studying the dependence of the Raman intensity on film thickness. These effective cross sections are then used to estimate the local thickness and composition in a series of polymer:fullerene blends. We find that the model is accurate within ±10 nm in thickness and ±5 vol% in composition provided that (i) the film thickness is kept below the thickness corresponding to the first maximum of the calculated Raman intensity oscillation; (ii) the materials making up the blend show close enough effective Raman cross-sections; and (iii) the degree of order attained by the conjugated polymer in the blend is similar to that achieved when cast alone. Our methodology opens the possibility to make quantitative maps of composition and thickness over large areas (from microns to centimetres squared) with diffraction-limited resolution and in any multi-component system based thin film technology.
dc.description.sponsorshipWe are indebted to Bernhard Dörling from ICMAB for the development of the accelerated blade coating platform. We also acknowledge Antonio Sánchez-Díaz from ICMAB for the evaporation of MoO3/Ag electrodes. The Spanish Ministerio de Economía y Competitividad (MINECO) is gratefully acknowledged for its support through Grant No. SEV-2015-0496 in the framework of the Spanish Severo Ochoa Centre of Excellence program and through Grants No. MAT2012-37776, MAT2015-70850-P and No. CSD2010-00044 (Consolider NANOTHERM). We also acknowledge financial support from the European Research Council through project ERC CoG648901. M.S.V. acknowledges support from the Engineering and Physical Sciences Research Council (EPSRC) via a post-graduate research studentship. J.N. and X.S. thank the EPSRC for support via grants EP/M025020/1 and EP/K029843/1. M.S.V. and X.S. acknowledge additional supports from European COST Action MP1307 (StableNextSol) for inter-institutional research visits.
dc.publisherRoyal Society of Chemistry (RSC)
dc.relation.urlhttp://pubs.rsc.org/en/Content/ArticleLanding/2017/TC/C7TC01472D#!divAbstract
dc.rightsArchived with thanks to J. Mater. Chem. C
dc.titleQuantifying Local Thickness and Composition in Thin Films of Organic Photovoltaic Blends by Raman Scattering
dc.typeArticle
dc.contributor.departmentKAUST Solar Center (KSC)
dc.identifier.journalJ. Mater. Chem. C
dc.eprint.versionPost-print
dc.contributor.institutionInstitut de Ciència de Materials de Barcelona (ICMAB-CSIC), Bellaterra, 08193, Spain.
dc.contributor.institutionCentre for Plastic Electronics and Department of Physics, Imperial College London, Prince Consort Road, London SW7 2AZ, UK.
dc.contributor.institutionCentre for Plastic Electronics and Department of Chemistry, Imperial College London, Exhibition Road, London SW7 2AZ, UK.
dc.contributor.institutionInstitució Catalana de Recerca I Estudis Avançats (ICREA), Barcelona, 08010, Spain.
kaust.personMcCulloch, Iain


Files in this item

Thumbnail
Name:
c7tc01472d.pdf
Size:
1.560Mb
Format:
PDF
Description:
Accepted Manuscript
Thumbnail
Name:
c7tc01472d1.pdf
Size:
1.528Mb
Format:
PDF
Description:
Supplemental files

This item appears in the following Collection(s)

Show simple item record