Show simple item record

dc.contributor.authorNag, Anindya
dc.contributor.authorMukhopadhyay, Subhas Chandra
dc.contributor.authorKosel, Jürgen
dc.date.accessioned2017-01-02T09:55:33Z
dc.date.available2017-01-02T09:55:33Z
dc.date.issued2016-10-17
dc.identifier.citationNag A, Mukhopadhyay SC, Kosel J (2017) Tactile Sensing From Laser-Ablated Metallized PET Films. IEEE Sensors Journal 17: 7–13. Available: http://dx.doi.org/10.1109/JSEN.2016.2617878.
dc.identifier.issn1530-437X
dc.identifier.issn1558-1748
dc.identifier.issn2379-9153
dc.identifier.doi10.1109/JSEN.2016.2617878
dc.identifier.urihttp://hdl.handle.net/10754/622608
dc.description.abstractThis paper reports the design, fabrication, and implementation of a novel sensor patch developed from commercial polyethylene terephthalate films metallized with aluminum on one side. The aluminum was ablated with laser to form interdigitated electrodes to make sensor prototypes. The interdigitated electrodes were patterned on the substrate with a laser cutter. Characterization of the prototypes was done to determine their operating frequency followed by experimentation. The prototypes have been used as a tactile sensor showing promising results for using these patches in applications with contact pressures considerably lesser than normal human contact pressure.
dc.description.sponsorshipThe authors would like to acknowledge King Abdullah University of Science and Technology (KAUST), Saudi Arabia to provide research facilities to design and develop the sensor patches. They would also like to thank Macquarie University, Sydney, Australia, to give opportunities to characterize and test the fabricated prototypes.
dc.publisherInstitute of Electrical and Electronics Engineers (IEEE)
dc.relation.urlhttp://ieeexplore.ieee.org/document/7592432/
dc.subjecttactile sensing
dc.subjectPET
dc.subjectaluminum
dc.subjectlaser
dc.subjectinterdigitated
dc.subjectsensor prototypes
dc.titleTactile Sensing From Laser-Ablated Metallized PET Films
dc.typeArticle
dc.contributor.departmentComputer, Electrical and Mathematical Sciences and Engineering (CEMSE) Division
dc.identifier.journalIEEE Sensors Journal
dc.contributor.institutionFaculty of Science and Engineering, Macquarie University, Sydney, NSW, Australia
kaust.personKosel, Jürgen


This item appears in the following Collection(s)

Show simple item record