KAUST DepartmentComputer, Electrical and Mathematical Sciences and Engineering (CEMSE) Division
Electrical Engineering Program
Online Publication Date2016-10-17
Print Publication Date2017-01-01
Permanent link to this recordhttp://hdl.handle.net/10754/622608
MetadataShow full item record
AbstractThis paper reports the design, fabrication, and implementation of a novel sensor patch developed from commercial polyethylene terephthalate films metallized with aluminum on one side. The aluminum was ablated with laser to form interdigitated electrodes to make sensor prototypes. The interdigitated electrodes were patterned on the substrate with a laser cutter. Characterization of the prototypes was done to determine their operating frequency followed by experimentation. The prototypes have been used as a tactile sensor showing promising results for using these patches in applications with contact pressures considerably lesser than normal human contact pressure.
CitationNag A, Mukhopadhyay SC, Kosel J (2017) Tactile Sensing From Laser-Ablated Metallized PET Films. IEEE Sensors Journal 17: 7–13. Available: http://dx.doi.org/10.1109/JSEN.2016.2617878.
SponsorsThe authors would like to acknowledge King Abdullah University of Science and Technology (KAUST), Saudi Arabia to provide research facilities to design and develop the sensor patches. They would also like to thank Macquarie University, Sydney, Australia, to give opportunities to characterize and test the fabricated prototypes.
JournalIEEE Sensors Journal