Show simple item record

dc.contributor.authorChandran, Akhil A.
dc.contributor.authorYounis, Mohammad I.
dc.date.accessioned2017-01-02T09:55:30Z
dc.date.available2017-01-02T09:55:30Z
dc.date.issued2016-09-15
dc.identifier.citationChandran AA, Younis MI (2016) Multi frequency excited MEMS cantilever beam resonator for Mixer-Filter applications. 2016 3rd International Conference on Signal Processing and Integrated Networks (SPIN). Available: http://dx.doi.org/10.1109/SPIN.2016.7566795.
dc.identifier.doi10.1109/SPIN.2016.7566795
dc.identifier.urihttp://hdl.handle.net/10754/622567
dc.description.abstractWireless communication uses Radio Frequency waves to transfer information from one point to another. The modern RF front end devices are implementing MEMS in their designs so as to exploit the inherent properties of MEMS devices, such as its low mass, low power consumption, and small size. Among the components in the RF transceivers, band pass filters and mixers play a vital role in achieving the optimum RF performance. And this paper aims at utilizing an electrostatically actuated micro cantilever beam resonator's nonlinear frequency mixing property to realize a Mixer-Filter configuration through multi-frequency excitation. The paper studies about the statics and dynamics of the device. Simulations are carried out to study the added benefits of multi frequency excitation. The modelling of the cantilever beam has been done using a Reduced Order Model of the Euler-Bernoulli's beam equation by implementing the Galerkin discretization. The device is shown to be able to down-convert signals from 960 MHz of frequency to an intermediate frequency around 50 MHz and 70 MHz in Phase 1 and 2, respectively. The simulation showed promising results to take the project to the next level. © 2016 IEEE.
dc.description.sponsorshipAuthors would like to express gratitude to Mr. Alwathiqbellah Ibrahim, PhD candidate & Research Assistant, Mechanical Engineering Department, State University of New York at Binghamton and to Prof. M. S Prasad, Director, Amity Institute of Space Science and Technology, Amity University Uttar Pradesh, for their support.
dc.publisherInstitute of Electrical and Electronics Engineers (IEEE)
dc.relation.urlhttp://ieeexplore.ieee.org/document/7566795/
dc.subjectMEMS Resonator
dc.subjectMixer-Filter
dc.subjectReduced Order Modeling
dc.subjectRF Down-conversion
dc.titleMulti frequency excited MEMS cantilever beam resonator for Mixer-Filter applications
dc.typeConference Paper
dc.contributor.departmentPhysical Sciences and Engineering (PSE) Division
dc.contributor.departmentMechanical Engineering Program
dc.identifier.journal2016 3rd International Conference on Signal Processing and Integrated Networks (SPIN)
dc.conference.date2016-02-11 to 2016-02-12
dc.conference.name3rd International Conference on Signal Processing and Integrated Networks, SPIN 2016
dc.conference.locationNoida, IND
dc.contributor.institutionInstitute of Aeronautical Engineering, Hyderabad, India
kaust.personYounis, Mohammad I.


This item appears in the following Collection(s)

Show simple item record