Show simple item record

dc.contributor.advisorFarooq, Aamir
dc.contributor.authorJaved, Tamour
dc.date.accessioned2016-11-21T05:40:53Z
dc.date.available2016-11-21T05:40:53Z
dc.date.issued2016-11
dc.identifier.doi10.25781/KAUST-HE6A0
dc.identifier.urihttp://hdl.handle.net/10754/621837
dc.description.abstractFuture thrusts for gasoline engine development can be broadly summarized into two categories: (i) efficiency improvements in conventional spark ignition engines, and (ii) development of advance compression ignition (ACI) concepts. Efficiency improvements in conventional spark ignition engines requires downsizing (and turbocharging) which may be achieved by using high octane gasolines, whereas, low octane gasolines fuels are anticipated for ACI concepts. The current work provides the essential combustion kinetic data, targeting both thrusts, that is needed to develop high fidelity gasoline surrogate mechanisms and surrogate complexity guidelines. Ignition delay times of a wide range of certified gasolines and surrogates are reported here. These measurements were performed in shock tubes and rapid compression machines over a wide range of experimental conditions (650 – 1250 K, 10 – 40 bar) relevant to internal combustion engines. Using the measured the data and chemical kinetic analyses, the surrogate complexity requirements for these gasolines in homogeneous environments are specified. For the discussions presented here, gasolines are classified into three categories: (i) Low octane gasolines including Saudi Aramco’s light naphtha fuel (anti-knock index, AKI = (RON + MON)/2 = 64; Sensitivity (S) = RON – MON = 1), certified FACE (Fuels for Advanced Combustion Engines) gasoline I and J (AKI ~ 70, S = 0.7 and 3 respectively), and their Primary Reference Fuels (PRF, mixtures of n-heptane and iso-octane) and multi-component surrogates. (ii) Mid octane gasolines including FACE A and C (AKI ~ 84, S ~ 0 and 1 respectively) and their PRF surrogates. Laser absorption measurements of intermediate and product species formed during gasoline/surrogate oxidation are also reported. (iii) A wide range of n-heptane/iso-octane/toluene (TPRF) blends to adequately represent the octane and sensitivity requirements of high octane gasolines including FACE gasoline F and G (AKI ~ 91, S = 5.6 and 11 respectively) and certified Haltermann (AKI ~ 87, S = 7.6) and Coryton (AKI ~ 92, S = 10.9) gasolines. To assess conditions where shock tubes may not be ideal devices for ignition delay measurements, this work also presents a detailed discussion on shock tube pre-ignition affected ignition data and the ignition regimes in homogeneous environments. The shock tube studies on pre-ignition and associated bulk ignition advance may help engines research community understand and control super-knock events.
dc.language.isoen
dc.subjectShock Tube
dc.subjectRCM
dc.subjectIgnition delay
dc.subjectGasolines
dc.subjectSurrogates
dc.subjectChemical kinetics
dc.titleCombustion Kinetic Studies of Gasolines and Surrogates
dc.typeDissertation
dc.contributor.departmentPhysical Sciences and Engineering (PSE) Division
thesis.degree.grantorKing Abdullah University of Science and Technology
dc.contributor.committeememberRoberts, William L.
dc.contributor.committeememberSarathy, Mani
dc.contributor.committeememberKnio, Omar
dc.contributor.committeememberChaumeix, Nabiha
thesis.degree.disciplineMechanical Engineering
thesis.degree.nameDoctor of Philosophy
refterms.dateFOA2018-06-13T14:03:19Z


Files in this item

Thumbnail
Name:
Tamour_Javed_PhD_Dissertationv9.pdf
Size:
5.724Mb
Format:
PDF
Description:
Dissertation_Tamour Javed

This item appears in the following Collection(s)

Show simple item record