Show simple item record

dc.contributor.authorBadra, Jihad A.
dc.contributor.authorSim, Jaeheon
dc.contributor.authorElwardani, Ahmed Elsaid
dc.contributor.authorJaasim, Mohammed
dc.contributor.authorViollet, Yoann
dc.contributor.authorChang, Junseok
dc.contributor.authorAmer, Amer
dc.contributor.authorIm, Hong G.
dc.date.accessioned2016-11-03T13:24:06Z
dc.date.available2016-11-03T13:24:06Z
dc.date.issued2016-01-29
dc.identifier.citationBadra JA, Sim J, Elwardany A, Jaasim M, Viollet Y, et al. (2016) Numerical Simulations of Hollow-Cone Injection and Gasoline Compression Ignition Combustion With Naphtha Fuels. Journal of Energy Resources Technology 138: 052202. Available: http://dx.doi.org/10.1115/1.4032622.
dc.identifier.issn0195-0738
dc.identifier.doi10.1115/1.4032622
dc.identifier.urihttp://hdl.handle.net/10754/621748
dc.description.abstractGasoline compression ignition (GCI), also known as partially premixed compression ignition (PPCI) and gasoline direct injection compression ignition (GDICI), engines have been considered an attractive alternative to traditional spark ignition (SI) engines. Lean-burn combustion with the direct injection of fuel eliminates throttle losses for higher thermodynamic efficiencies, and the precise control of the mixture compositions allows better emission performance such as NOx and particulate matter (PM). Recently, low octane gasoline fuel has been identified as a viable option for the GCI engine applications due to its longer ignition delay characteristics compared to diesel and lighter evaporation compared to gasoline fuel (Chang et al., 2012, "Enabling High Efficiency Direct Injection Engine With Naphtha Fuel Through Partially Premixed Charge Compression Ignition Combustion," SAE Technical Paper No. 2012-01-0677). The feasibility of such a concept has been demonstrated by experimental investigations at Saudi Aramco (Chang et al., 2012, "Enabling High Efficiency Direct Injection Engine With Naphtha Fuel Through Partially Premixed Charge Compression Ignition Combustion," SAE Technical Paper No. 2012-01-0677; Chang et al., 2013, "Fuel Economy Potential of Partially Premixed Compression Ignition (PPCI) Combustion With Naphtha Fuel," SAE Technical Paper No. 2013-01-2701). The present study aims to develop predictive capabilities for low octane gasoline fuel compression ignition (CI) engines with accurate characterization of the spray dynamics and combustion processes. Full three-dimensional simulations were conducted using converge as a basic modeling framework, using Reynolds-averaged Navier-Stokes (RANS) turbulent mixing models. An outwardly opening hollow-cone spray injector was characterized and validated against existing and new experimental data. An emphasis was made on the spray penetration characteristics. Various spray breakup and collision models have been tested and compared with the experimental data. An optimum combination has been identified and applied in the combusting GCI simulations. Linear instability sheet atomization (LISA) breakup model and modified Kelvin-Helmholtz and Rayleigh-Taylor (KH-RT) break models proved to work the best for the investigated injector. Comparisons between various existing spray models and a parametric study have been carried out to study the effects of various spray parameters. The fuel effects have been tested by using three different primary reference fuel (PRF) and toluene primary reference fuel (TPRF) surrogates. The effects of fuel temperature and chemical kinetic mechanisms have also been studied. The heating and evaporative characteristics of the low octane gasoline fuel and its PRF and TPRF surrogates were examined. Copyright © 2016 by ASME.
dc.description.sponsorshipWe acknowledge the help and support from Saurav Mitra and Sarangarajan Vijayraghavan from Convergent Science, Inc. (CSI). This work was sponsored by the Fuel Technology Division at Saudi Aramco R&DC. The work at King Abdullah University of Science and Technology (KAUST) was funded by KAUST and Saudi Aramco under the FUELCOM program.
dc.publisherASME International
dc.titleNumerical Simulations of Hollow-Cone Injection and Gasoline Compression Ignition Combustion With Naphtha Fuels
dc.typeArticle
dc.contributor.departmentClean Combustion Research Center
dc.identifier.journalJournal of Energy Resources Technology
dc.contributor.institutionFuel Technology Division, R and DC, Saudi Aramco, Dhahran, Eastern Province, Saudi Arabia
dc.contributor.institutionMechanical Engineering Department, Faculty of Engineering, Alexandria University, Alexandria, Egypt
kaust.personSim, Jaeheon
kaust.personElwardani, Ahmed Elsaid
kaust.personJaasim, Mohammed
kaust.personIm, Hong G.


This item appears in the following Collection(s)

Show simple item record