Show simple item record

dc.contributor.authorPeng, You-Yu
dc.contributor.authorAkuzum, Bilen
dc.contributor.authorKurra, Narendra
dc.contributor.authorZhao, Meng-Qiang
dc.contributor.authorAlhabeb, Mohamed
dc.contributor.authorAnasori, Babak
dc.contributor.authorKumbur, Emin Caglan
dc.contributor.authorAlshareef, Husam N.
dc.contributor.authorGer, Ming-Der
dc.contributor.authorGogotsi, Yury
dc.date.accessioned2016-09-04T07:02:10Z
dc.date.available2016-09-04T07:02:10Z
dc.date.issued2016
dc.identifier.citationAll-MXene (2D titanium carbide) solid-state microsupercapacitors for on-chip energy storage 2016 Energy Environ. Sci.
dc.identifier.issn1754-5692
dc.identifier.issn1754-5706
dc.identifier.doi10.1039/C6EE01717G
dc.identifier.urihttp://hdl.handle.net/10754/619755
dc.description.abstractOn-chip energy storage is a rapidly evolving research topic, opening doors for integration of batteries and supercapacitors at microscales on rigid and flexible platforms. Recently, a new class of two-dimensional (2D) transition metal carbides and nitrides (so-called MXenes) has shown great promise in electrochemical energy storage applications. Here, we report the fabrication of all-MXene (Ti3C2Tx) solid-state interdigital microsupercapacitors by employing a solution spray-coating, followed by a photoresist-free direct laser cutting method. Our prototype devices consisted of two layers of Ti3C2Tx with two different flake sizes. The bottom layer was stacked large-size MXene flakes (typical lateral dimensions of 3-6 μm) serving mainly as current collectors. The top layer was made of small-size MXene flakes (~1 μm) with a large number of defects and edges as the electroactive layer responsible for energy storage. Compared to Ti3C2Tx micro-supercapacitors with platinum current collectors, the all-MXene devices exhibited much lower contact resistance, higher capacitances and better rate-capabilities. The areal and volumetric capacitances of ~27 mF cm-2 and ~337 F cm-3, respectively, at a scan rate of 20 mV s-1 were achieved. The devices also demonstrated their excellent cyclic stability, with 100% capacitance retention after 10,000 cycles at a scan rate of 50 mV s-1. This study opens up a plethora of possible designs for high-performance on-chip devices employing different chemistries, flake sizes and morphologies of MXenes and their heterostructures.
dc.description.sponsorshipThis work was supported by the Fluid Interface Reactions, Structures and Transport (FIRST) Center, an Energy Frontier Research Center funded by the U.S. Department of Energy, Office of Science, and Office of Basic Energy Sciences. YP was supported by Ministry of Science and Technology of Taiwan under grants No. 104-2917-I-606-001. The authors wish to thank Professor James Tangorra at Drexel University for their assistance and use of their laser cutter, and Professor Adam Fontecchio for use of their Profilometer. XRD, SEM, and TEM investigations were performed at the Centralized Research Facilities (CRF) at Drexel University.
dc.language.isoen
dc.publisherRoyal Society of Chemistry (RSC)
dc.relation.urlhttp://xlink.rsc.org/?DOI=C6EE01717G
dc.rightsArchived with thanks to Energy Environ. Sci.
dc.titleAll-MXene (2D titanium carbide) solid-state microsupercapacitors for on-chip energy storage
dc.typeArticle
dc.contributor.departmentFunctional Nanomaterials and Devices Research Group
dc.contributor.departmentMaterial Science and Engineering Program
dc.contributor.departmentPhysical Science and Engineering (PSE) Division
dc.identifier.journalEnergy & Environmental Science
dc.eprint.versionPost-print
dc.contributor.institutionSchool of Defense Science, Chung Cheng Institute of Technology, National Defense University, Taoyuan City, Taiwan
dc.contributor.institutionA. J. Drexel Nanomaterials Institute, Department of Materials Science and Engineering, Drexel University, Philadelphia, PA 19104, USA
dc.contributor.institutionElectrochemical Energy Systems Laboratory, Department of Mechanical Engineering and Mechanics, Drexel University, Philadelphia, PA 19104 USA
dc.contributor.institutionDepartment of Chemical &Materials Engineering, Chung Cheng Institute of Technology, National Defense University, Taoyuan City, Taiwan
dc.contributor.affiliationKing Abdullah University of Science and Technology (KAUST)
kaust.personKurra, Narendra
kaust.personAlshareef, Husam N.
refterms.dateFOA2017-08-01T00:00:00Z


Files in this item

Thumbnail
Name:
c6ee01717g.pdf
Size:
1.149Mb
Format:
PDF
Description:
Accepted Manuscript
Thumbnail
Name:
c6ee01717g1.pdf
Size:
1.639Mb
Format:
PDF
Description:
Supplemental files

This item appears in the following Collection(s)

Show simple item record