High-performance intrinsically microporous dihydroxyl-functionalized triptycene-based polyimide for natural gas separation
KAUST DepartmentPhysical Sciences and Engineering (PSE) Division
Chemical and Biological Engineering Program
Advanced Membranes and Porous Materials Research Center
Advanced Membranes and Porous Materials Center (AMPMC)
Permanent link to this recordhttp://hdl.handle.net/10754/603539
MetadataShow full item record
AbstractA novel polyimide of intrinsic microporosity (PIM-PI) was synthesized from a 9,10-diisopropyl-triptycene-based dianhydride (TPDA) and dihydroxyl-functionalized 4,6-diaminoresorcinol (DAR). The unfunctionalized TPDA-m-phenylenediamine (mPDA) polyimide derivative was made as a reference material to evaluate the effect of the OH group in TPDA-DAR on its gas transport properties. Pure-gas permeability coefficients of He, H2, N2, O2, CH4, and CO2 were measured at 35 °C and 2 atm. The BET surface area based on nitrogen adsorption of dihydroxyl-functionalized TPDA-DAR (308 m2g-1) was 45% lower than that of TPDA-mPDA (565 m2g-1). TPDA-mPDA had a pure-gas CO2 permeability of 349 Barrer and CO2/CH4 selectivity of 32. The dihydroxyl-functionalized TPDA-DAR polyimide exhibited enhanced pure-gas CO2/CH4 selectivity of 46 with a moderate decrease in CO2 permeability to 215 Barrer. The CO2 permeability of TPDA-DAR was ∼30-fold higher than that of a commercial cellulose triacetate membrane coupled with 39% higher pure-gas CO2/CH4 selectivity. The TPDA-based dihydroxyl-containing polyimide showed good plasticization resistance and maintained high mixed-gas selectivity of 38 when tested at a typical CO2 natural gas wellhead CO2 partial pressure of 10 atm.
CitationHigh-performance intrinsically microporous dihydroxyl-functionalized triptycene-based polyimide for natural gas separation 2016 Polymer
SponsorsThe research reported in this publication was supported by funding from King Abdullah University of Science and Technology (KAUST).