Show simple item record

dc.contributor.authorDing, I-Kang
dc.contributor.authorTétreault, Nicolas
dc.contributor.authorBrillet, Jérémie
dc.contributor.authorHardin, Brian E.
dc.contributor.authorSmith, Eva H.
dc.contributor.authorRosenthal, Samuel J.
dc.contributor.authorSauvage, Frédéric
dc.contributor.authorGrätzel, Michael
dc.contributor.authorMcGehee, Michael D.
dc.date.accessioned2016-02-28T05:49:30Z
dc.date.available2016-02-28T05:49:30Z
dc.date.issued2009-08-10
dc.identifier.citationDing I-K, Tétreault N, Brillet J, Hardin BE, Smith EH, et al. (2009) Pore-Filling of Spiro-OMeTAD in Solid-State Dye Sensitized Solar Cells: Quantification, Mechanism, and Consequences for Device Performance. Advanced Functional Materials 19: 2431–2436. Available: http://dx.doi.org/10.1002/adfm.200900541.
dc.identifier.issn1616-301X
dc.identifier.issn1616-3028
dc.identifier.doi10.1002/adfm.200900541
dc.identifier.urihttp://hdl.handle.net/10754/599339
dc.description.abstractIn this paper, the pore filling of spiro-OMeTAD (2,2′,7,7′- tetrakis-(N,N-di-p-methoxyphenylamine)9,9′-spirobtfIuorene) in mesoporous TiO2 films is quantified for the first time using XPS depth profiling and UV-Vis absorption spectroscopy. It is shown that spiro-OMeTAD can penetrate the entire depth of the film, and its concentration is constant throughout the film. We determine that in a 2.5-μm-thick film, the volume of the pores is 60-65% filled. The pores become less filled when thicker films are used. Such filling fraction is much higher than the solution concentration because the excess solution on top of the film can act as a reservoir during the spin coating process. Lastly, we demonstrate that by using a lower spin coating speed and higher spiro-OMeTAD solution concentration, we can increase the filling fraction and consequently the efficiency of the device. © 2009 WILEY-VCH Verlag GmbH & Co. KGaA.
dc.description.sponsorshipThis publication was partially based on work supported the Center forAdvanced Molecular Photovoltaics (Award No KUS-C1-015-21), made byKing Abdullah University of Science and Technology (KAUST). It was alsopartially supported by the Office of Naval Research. I-K. Ding is supportedby a Chevron Stanford Graduate Fellowship. We thank Chuck Hitzman andDr. Michael Kelly for valuable discussions and experimental assistance withX-ray photoelectron spectroscopy and Dr. Brian O’Regan for giving us theidea of dissolving out spiro-OMeTAD from the pores. Jeremie Brilletreceived financial support from a Marie Curie Research Training Network,Hydrogen Project (MRTN-CT-2006-032474). Supporting Information isavailable online from Wiley InterScience or the author.
dc.publisherWiley
dc.titlePore-Filling of Spiro-OMeTAD in Solid-State Dye Sensitized Solar Cells: Quantification, Mechanism, and Consequences for Device Performance
dc.typeArticle
dc.identifier.journalAdvanced Functional Materials
dc.contributor.institutionStanford University, Palo Alto, United States
dc.contributor.institutionEcole Polytechnique Federale de Lausanne, Lausanne, Switzerland
kaust.grant.numberKUS-C1-015-21


This item appears in the following Collection(s)

Show simple item record