Polyethyleneimine-Functionalized Polyamide Imide (Torlon) Hollow-Fiber Sorbents for Post-Combustion CO 2 Capture
KAUST Grant NumberKUS-I1-011-21
Permanent link to this recordhttp://hdl.handle.net/10754/599212
MetadataShow full item record
AbstractCarbon dioxide emitted from existing coal-fired power plants is a major environmental concern due to possible links to global climate change. In this study, we expand upon previous work focused on aminosilane-functionalized polymeric hollow-fiber sorbents by introducing a new class of polyethyleneimine (PEI)-functionalized polymeric hollow-fiber sorbents for post-combustion carbon dioxide capture. Different molecular weight PEIs (Mn≈600, 1800, 10 000, and 60 000) were studied as functional groups on polyamide imide (PAI, Torlon) hollow fibers. This imide ring-opening modification introduces two amide functional groups and was confirmed by FTIR attenuated total reflectance spectroscopy. The carbon dioxide equilibrium sorption capacities of PEI-functionalized Torlon materials were characterized by using both pressure decay and gravimetric sorption methods. For equivalent PEI concentrations, PAI functionalized with lower molecular weight PEI exhibited higher carbon dioxide capacities. The effect of water in the ring-opening reaction was also studied. Up to a critical value, water in the reaction mixture enhanced the degree of functionalization of PEI to Torlon and resulted in higher carbon dioxide uptake within the functionalized material. Above the critical value, roughly 15 % w/w water, the fiber morphology was lost and the fiber was soluble in the solvent. PEI-functionalized (Mn≈600) PAI under optimal reaction conditions was observed to have the highest CO2 uptake: 4.9 g CO2 per 100 g of polymer (1.1 mmol g-1) at 0.1 bar and 35°C with dry 10 % CO2/90 % N2 feed for thermogravimetric analysis. By using water-saturated feeds (10 % CO2/90 % N2 dry basis), CO2 sorption was observed to increase to 6.0 g CO2 per 100 g of sorbent (1.4 mmol g-1). This material also demonstrated stability in cyclic adsorption-desorption operations, even under wet conditions at which some highly effective sorbents tend to lose performance. Thus, PEI-functionalized PAI fibers can be considered as promising material for post-combustion CO2 capture. Sucked in! Polyethyleneimine (PEI)-functionalized polymeric hollow-fiber sorbents for post-combustion carbon dioxide capture are described. Different molecular weight PEIs are studied as functional groups on polyamide imide (PAI) hollow fibers. For equivalent PEI concentrations, PAI functionalized with lower molecular weight PEI exhibit higher CO2 capacities (see picture). Copyright © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.
CitationLi FS, Qiu W, Lively RP, Lee JS, Rownaghi AA, et al. (2013) Polyethyleneimine-Functionalized Polyamide Imide (Torlon) Hollow-Fiber Sorbents for Post-Combustion CO 2 Capture . ChemSusChem 6: 1216–1223. Available: http://dx.doi.org/10.1002/cssc.201300172.
SponsorsWe gratefully acknowledge support for this work by award no. KUS-I1-011-21 made by King Abdullah University of Science and Technology (KAUST). We would like to thank Andrew Brown for the help with FTIR-KBr measurements.
CollectionsPublications Acknowledging KAUST Support
- Poly(amide-imide)/silica supported PEI hollow fiber sorbents for postcombustion CO(2) capture by RTSA.
- Authors: Labreche Y, Fan Y, Rezaei F, Lively RP, Jones CW, Koros WJ
- Issue date: 2014 Nov 12
- Aminosilane-grafted polymer/silica hollow fiber adsorbents for CO₂ capture from flue gas.
- Authors: Rezaei F, Lively RP, Labreche Y, Chen G, Fan Y, Koros WJ, Jones CW
- Issue date: 2013 May
- Aminosilane-Grafted Zirconia-Titiania-Silica Nanoparticles/Torlon Hollow Fiber Composites for CO2 Capture.
- Authors: Rownaghi AA, Kant A, Li X, Thakkar H, Hajari A, He Y, Brennan PJ, Hosseini H, Koros WJ, Rezaei F
- Issue date: 2016 May 23
- Amine-tethered solid adsorbents coupling high adsorption capacity and regenerability for CO2 capture from ambient air.
- Authors: Choi S, Gray ML, Jones CW
- Issue date: 2011 May 23
- In situ Formation of a Monodispersed Spherical Mesoporous Nanosilica-Torlon Hollow-Fiber Composite for Carbon Dioxide Capture.
- Authors: Rownaghi AA, Rezaei F, Labreche Y, Brennan PJ, Johnson JR, Li FS, Koros WJ
- Issue date: 2015 Oct 26