Show simple item record

dc.contributor.authorKedia, Kushal S.
dc.contributor.authorGhoniem, Ahmed F.
dc.date.accessioned2016-02-25T13:41:19Z
dc.date.available2016-02-25T13:41:19Z
dc.date.issued2012-03
dc.identifier.citationKedia KS, Ghoniem AF (2012) Mechanisms of stabilization and blowoff of a premixed flame downstream of a heat-conducting perforated plate. Combustion and Flame 159: 1055–1069. Available: http://dx.doi.org/10.1016/j.combustflame.2011.10.014.
dc.identifier.issn0010-2180
dc.identifier.doi10.1016/j.combustflame.2011.10.014
dc.identifier.urihttp://hdl.handle.net/10754/598792
dc.description.abstractThe objective of this work is to investigate the flame stabilization mechanism and the conditions leading to the blowoff of a laminar premixed flame anchored downstream of a heat-conducting perforated-plate/multi-hole burner, with overall nearly adiabatic conditions. We use unsteady, fully resolved, two-dimensional simulations with detailed chemical kinetics and species transport for methane-air combustion. Results show a bell-shaped flame stabilizing above the burner plate hole, with a U-shaped section anchored between neighboring holes. The base of the positively curved U-shaped section of the flame is positioned near the stagnation point, at a location where the flame displacement speed is equal to the flow speed. This location is determined by the combined effect of heat loss and flame stretch on the flame displacement speed. As the mass flow rate of the reactants is increased, the flame displacement speed at this location varies non-monotonically. As the inlet velocity is increased, the recirculation zone grows slowly, the flame moves downstream, and the heat loss to the burner decreases, strengthening the flame and increasing its displacement speed. As the inlet velocity is raised, the stagnation point moves downstream, and the flame length grows to accommodate the reactants mass flow. Concomitantly, the radius of curvature of the flame base decreases until it reaches an almost constant value, comparable to the flame thickness. While the heat loss decreases, the higher flame curvature dominates thereby reducing the displacement speed of the flame base. For a stable flame, the gradient of the flame base displacement speed normal to the flame is higher than the gradient of the flow speed along the same direction, leading to dynamic stability. As inlet velocity is raised further, the former decreases while the latter increases until the stability condition is violated, leading to blowoff. The flame speed during blow off is determined by the feedback between the growing recirculation zone and the cooling burner plate. © 2011 The Combustion Institute.
dc.description.sponsorshipThis work was supported by King Abdullah University of Science and Technology (KAUST).
dc.publisherElsevier BV
dc.subjectBlowoff
dc.subjectBurner heat loss
dc.subjectCurvature
dc.subjectFlame stabilization
dc.subjectPerforated plate
dc.subjectPremixed
dc.titleMechanisms of stabilization and blowoff of a premixed flame downstream of a heat-conducting perforated plate
dc.typeArticle
dc.identifier.journalCombustion and Flame
dc.contributor.institutionMassachusetts Institute of Technology, Cambridge, United States


This item appears in the following Collection(s)

Show simple item record