Improved Isotherm Data for Adsorption of Methane on Activated Carbons
AuthorsLoh, Wai Soong
Rahman, Kazi Afzalur
Saha, Bidyut Baran
Choo, Yoo Sang
Khoo, Boo Cheong
Ng, Kim Choon
Permanent link to this recordhttp://hdl.handle.net/10754/598578
MetadataShow full item record
AbstractThis article presents the adsorption isotherms of methane onto two different types of activated carbons, namely, Maxsorb III and ACF (A-20) at temperatures from (5 to 75) °C and pressures up to 2.5 MPa. The volumetric technique has been employed to measure the adsorption isotherms. The experimental results presented herein demonstrate the improved accuracy of the uptake values compared with previous measurement techniques for similar adsorbate-adsorbent combinations. The results are analyzed with various adsorption isotherm models. The heat of adsorption, which is concentration and temperature dependent, has been calculated from the measured isotherm data. Henry's law coefficients for these adsorbent-methane pairs are also evaluated at various temperatures. © 2010 American Chemical Society.
CitationLoh WS, Rahman KA, Chakraborty A, Saha BB, Choo YS, et al. (2010) Improved Isotherm Data for Adsorption of Methane on Activated Carbons. J Chem Eng Data 55: 2840–2847. Available: http://dx.doi.org/10.1021/je901011c.
SponsorsThe authors' gratefully acknowledge the financial support given by grants (R33-2009-000-1966-0) from World Class University (WCU), Project of the National Research Foundation, Korea, (R265-000-268-305) from A*STAR/MPA, Singapore, and (R265-000-286-597) from King Abdullah University of Science and Technology (KAUST), KSA.
PublisherAmerican Chemical Society (ACS)