Show simple item record

dc.contributor.authorZheng, Guangyuan
dc.contributor.authorYang, Yuan
dc.contributor.authorCha, Judy J.
dc.contributor.authorHong, Seung Sae
dc.contributor.authorCui, Yi
dc.date.accessioned2016-02-25T13:31:18Z
dc.date.available2016-02-25T13:31:18Z
dc.date.issued2011-10-12
dc.identifier.citationZheng G, Yang Y, Cha JJ, Hong SS, Cui Y (2011) Hollow Carbon Nanofiber-Encapsulated Sulfur Cathodes for High Specific Capacity Rechargeable Lithium Batteries. Nano Lett 11: 4462–4467. Available: http://dx.doi.org/10.1021/nl2027684.
dc.identifier.issn1530-6984
dc.identifier.issn1530-6992
dc.identifier.pmid21916442
dc.identifier.doi10.1021/nl2027684
dc.identifier.urihttp://hdl.handle.net/10754/598511
dc.description.abstractSulfur has a high specific capacity of 1673 mAh/g as lithium battery cathodes, but its rapid capacity fading due to polysulfides dissolution presents a significant challenge for practical applications. Here we report a hollow carbon nanofiber-encapsulated sulfur cathode for effective trapping of polysulfides and demonstrate experimentally high specific capacity and excellent electrochemical cycling of the cells. The hollow carbon nanofiber arrays were fabricated using anodic aluminum oxide (AAO) templates, through thermal carbonization of polystyrene. The AAO template also facilitates sulfur infusion into the hollow fibers and prevents sulfur from coating onto the exterior carbon wall. The high aspect ratio of the carbon nanofibers provides an ideal structure for trapping polysulfides, and the thin carbon wall allows rapid transport of lithium ions. The small dimension of these nanofibers provides a large surface area per unit mass for Li2S deposition during cycling and reduces pulverization of electrode materials due to volumetric expansion. A high specific capacity of about 730 mAh/g was observed at C/5 rate after 150 cycles of charge/discharge. The introduction of LiNO3 additive to the electrolyte was shown to improve the Coulombic efficiency to over 99% at C/5. The results show that the hollow carbon nanofiber-encapsulated sulfur structure could be a promising cathode design for rechargeable Li/S batteries with high specific energy. © 2011 American Chemical Society.
dc.description.sponsorshipA portion of this work was supported by the Department of Energy, Office of Basic Energy Sciences, Division of Materials Sciences and Engineering under contract DE-AC02-76SF0051 through the SLAC National Accelerator Laboratory LDRD project. Y.C. acknowledges support from King Abdullah University of Science and Technology (KAUST) Investigator Award (no. KUS-l1-001-12). We thank Yu Lin at Stanford University for help with Raman spectroscopy. G.Z. acknowledges financial support from Agency for Science, Technology and Research (A*STAR), Singapore. Y.Y. acknowledges financial support from a Stanford Graduate Fellowship (SGF).
dc.publisherAmerican Chemical Society (ACS)
dc.subjectenergy storage
dc.subjecthigh specific capacity
dc.subjectHollow carbon nanofiber-encapsulated sulfur
dc.subjectLi/S batteries
dc.titleHollow Carbon Nanofiber-Encapsulated Sulfur Cathodes for High Specific Capacity Rechargeable Lithium Batteries
dc.typeArticle
dc.identifier.journalNano Letters
dc.contributor.institutionStanford University, Palo Alto, United States
dc.contributor.institutionStanford Linear Accelerator Center, Menlo Park, United States
kaust.grant.numberKUS-l1-001-12


This item appears in the following Collection(s)

Show simple item record