Lively, Ryan P.
Noel, James D.
Dose, Michelle E.
McCool, Benjamin A.
Chance, Ronald R.
Koros, William J.
KAUST Grant NumberKUS-I1-011-21
Online Publication Date2012-05-29
Print Publication Date2012-06-12
Permanent link to this recordhttp://hdl.handle.net/10754/597474
MetadataShow full item record
AbstractWater and ethanol vapor adsorption phenomena are investigated systematically on a series of MFI-type zeolites: silicalite-1 samples synthesized via both alkaline (OH -) and fluoride (F -) routes, and ZSM-5 samples with different Si/Al ratios as well as different charge-balancing cations. Full isotherms (0.05-0.95 activity) over the range 25-55 °C are presented, and the lowest total water uptake ever reported in the literature is shown for silicalite-1 made via a fluoride-mediated route wherein internal silanol defects are significantly reduced. At a water activity level of 0.95 (35 °C), the total water uptake by silicalite-1 (F -) was found to be 0.263 mmol/g, which was only 12.6%, 9.8%, and 3.3% of the capacity for silicalite-1 (OH -), H-ZSM-5 (Si/Al:140), and H-ZSM-5 (Si/Al:15), respectively, under the same conditions. While water adsorption shows distinct isotherms for different MFI-type zeolites due to the difference in the concentration, distribution, and types of hydrophilic sites, the ethanol adsorption isotherms present relatively comparable results because of the overall organophilic nature of the zeolite framework. Due to the dramatic differences in the sorption behavior with the different sorbate-sorbent pairs, different models are applied to correlate and analyze the sorption isotherms. An adsorption potential theory was used to fit the water adsorption isotherms on all MFI-type zeolite adsorbents studied. The Langmuir model and Sircar's model are applied to describe ethanol adsorption on silicalite-1 and ZSM-5 samples, respectively. An ideal ethanol/water adsorption selectivity (α) was estimated for the fluoride-mediated silicalite-1. At 35 °C, α was estimated to be 36 for a 5 mol % ethanol solution in water increasing to 53 at an ethanol concentration of 1 mol %. The adsorption data demonstrate that silicalite-1 made via the fluoride-mediated route is a promising candidate for ethanol extraction from dilute ethanol-water solutions. © 2012 American Chemical Society.
CitationZhang K, Lively RP, Noel JD, Dose ME, McCool BA, et al. (2012) Adsorption of Water and Ethanol in MFI-Type Zeolites. Langmuir 28: 8664–8673. Available: http://dx.doi.org/10.1021/la301122h.
SponsorsThis material is based upon work supported by the Department of Energy under Award Number DE-FOA-0000096 and also supported by Algenol Biofuels. The authors thank Joshua Thompson and Megan Lydon for useful discussions on the synthesis of silicalite-1 using the fluoride mediated route. W. J. Koros thanks Award no. KUS-I1-011-21 made by King Abdullah University of Science and Technology (KAUST) for financial support.
PublisherAmerican Chemical Society (ACS)
CollectionsPublications Acknowledging KAUST Support
- Monte Carlo simulation of water adsorption in hydrophobic MFI zeolites with hydrophilic sites.
- Authors: Ahunbay MG
- Issue date: 2011 Apr 19
- Adsorption equilibrium modeling and solution chemistry dependence of fluoride removal from water by trivalent-cation-exchanged zeolite F-9.
- Authors: Onyango MS, Kojima Y, Aoyi O, Bernardo EC, Matsuda H
- Issue date: 2004 Nov 15
- Molecular simulations of water and paracresol in MFI zeolite--a Monte Carlo study.
- Authors: Narasimhan L, Boulet P, Kuchta B, Schaef O, Denoyel R, Brunet P
- Issue date: 2009 Oct 6
- The adsorption of nicotine from aqueous solutions on different zeolite structures.
- Authors: Rakić V, Damjanović L, Rac V, Stosić D, Dondur V, Auroux A
- Issue date: 2010 Mar
- Probing the relationship between silicalite-1 defects and polyol adsorption properties.
- Authors: Mallon EE, Jeon MY, Navarro M, Bhan A, Tsapatsis M
- Issue date: 2013 Jun 4