Show simple item record

dc.contributor.authorManser, Joseph S.
dc.contributor.authorSaidaminov, Makhsud I.
dc.contributor.authorChristians, Jeffrey A.
dc.contributor.authorBakr, Osman
dc.contributor.authorKamat, Prashant V.
dc.date.accessioned2016-02-22T07:25:38Z
dc.date.available2016-02-22T07:25:38Z
dc.date.issued2016-02-16
dc.identifier.citationMaking and Breaking of Lead Halide Perovskites 2016, 49 (2):330 Accounts of Chemical Research
dc.identifier.issn0001-4842
dc.identifier.issn1520-4898
dc.identifier.pmid26789596
dc.identifier.doi10.1021/acs.accounts.5b00455
dc.identifier.urihttp://hdl.handle.net/10754/596895
dc.description.abstractA new front-runner has emerged in the field of next-generation photovoltaics. A unique class of materials, known as organic metal halide perovskites, bridges the gap between low-cost fabrication and exceptional device performance. These compounds can be processed at low temperature (typically in the range 80–150 °C) and readily self-assemble from the solution phase into high-quality semiconductor thin films. The low energetic barrier for crystal formation has mixed consequences. On one hand, it enables inexpensive processing and both optical and electronic tunability. The caveat, however, is that many as-formed lead halide perovskite thin films lack chemical and structural stability, undergoing rapid degradation in the presence of moisture or heat. To date, improvements in perovskite solar cell efficiency have resulted primarily from better control over thin film morphology, manipulation of the stoichiometry and chemistry of lead halide and alkylammonium halide precursors, and the choice of solvent treatment. Proper characterization and tuning of processing parameters can aid in rational optimization of perovskite devices. Likewise, gaining a comprehensive understanding of the degradation mechanism and identifying components of the perovskite structure that may be particularly susceptible to attack by moisture are vital to mitigate device degradation under operating conditions. This Account provides insight into the lifecycle of organic–inorganic lead halide perovskites, including (i) the nature of the precursor solution, (ii) formation of solid-state perovskite thin films and single crystals, and (iii) transformation of perovskites into hydrated phases upon exposure to moisture. In particular, spectroscopic and structural characterization techniques shed light on the thermally driven evolution of the perovskite structure. By tuning precursor stoichiometry and chemistry, and thus the lead halide charge-transfer complexes present in solution, crystallization kinetics can be tailored to yield improved thin film homogeneity. Because degradation of the as-formed perovskite film is in many ways analogous to its initial formation, the same suite of monitoring techniques reveals the moisture-induced transformation of low band gap methylammonium lead iodide (CH3NH3PbI3) to wide band gap hydrate compounds. The rate of degradation is increased upon exposure to light. Interestingly, the hydration process is reversible under certain conditions. This facile formation and subsequent chemical lability raises the question of whether CH3NH3PbI3 and its analogues are thermodynamically stable phases, thus posing a significant challenge to the development of transformative perovskite photovoltaics. Adequately addressing issues of structural and chemical stability under real-world operating conditions is paramount if perovskite solar cells are to make an impact beyond the benchtop. Expanding our fundamental knowledge of lead halide perovskite formation and degradation pathways can facilitate fabrication of stable, high-quality perovskite thin films for the next generation of photovoltaic and light emitting devices.
dc.description.sponsorshipWe acknowledge the support of King Abdullah University of Science and Technology (KAUST) through the Award OCRF-2014-CRG3-2268. The previously published material discussed in this Account was supported by the U.S. Department of Energy Office of Science, Office of Basic Energy Sciences under Award Number DE-FC02-04ER15533. This is contribution number NDRL 5090 from the Notre Dame Radiation Laboratory.
dc.language.isoen
dc.publisherAmerican Chemical Society (ACS)
dc.relation.urlhttp://pubs.acs.org/doi/abs/10.1021/acs.accounts.5b00455
dc.rightsThis is an open access article published under an ACS AuthorChoice License, which permits copying and redistribution of the article or any adaptations for non-commercial purposes. http://pubs.acs.org/page/policy/authorchoice_termsofuse.html
dc.titleMaking and Breaking of Lead Halide Perovskites
dc.typeArticle
dc.contributor.departmentKAUST Solar Center (KSC)
dc.contributor.departmentPhysical Sciences and Engineering (PSE) Division
dc.contributor.departmentKAUST Catalysis Center (KCC)
dc.identifier.journalAccounts of Chemical Research
dc.eprint.versionPublisher's Version/PDF
dc.contributor.institutionRadiation Laboratory
dc.contributor.institutionDepartment of Chemical and Biomolecular Engineering
dc.contributor.institutionDepartment of Chemistry and Biochemistry, University of Notre Dame, Notre Dame, Indiana 46556, United States
dc.contributor.affiliationKing Abdullah University of Science and Technology (KAUST)
kaust.personSaidaminov, Makhsud I.
kaust.personBakr, Osman
refterms.dateFOA2018-06-13T14:11:58Z


Files in this item

Thumbnail
Name:
acs2Eaccounts2E5b00455.pdf
Size:
6.416Mb
Format:
PDF
Description:
Main article

This item appears in the following Collection(s)

Show simple item record