AuthorsManser, Joseph S.
Saidaminov, Makhsud I.
Christians, Jeffrey A.
Kamat, Prashant V.
KAUST DepartmentKAUST Solar Center (KSC)
Physical Sciences and Engineering (PSE) Division
KAUST Catalysis Center (KCC)
Permanent link to this recordhttp://hdl.handle.net/10754/596895
MetadataShow full item record
AbstractA new front-runner has emerged in the field of next-generation photovoltaics. A unique class of materials, known as organic metal halide perovskites, bridges the gap between low-cost fabrication and exceptional device performance. These compounds can be processed at low temperature (typically in the range 80–150 °C) and readily self-assemble from the solution phase into high-quality semiconductor thin films. The low energetic barrier for crystal formation has mixed consequences. On one hand, it enables inexpensive processing and both optical and electronic tunability. The caveat, however, is that many as-formed lead halide perovskite thin films lack chemical and structural stability, undergoing rapid degradation in the presence of moisture or heat. To date, improvements in perovskite solar cell efficiency have resulted primarily from better control over thin film morphology, manipulation of the stoichiometry and chemistry of lead halide and alkylammonium halide precursors, and the choice of solvent treatment. Proper characterization and tuning of processing parameters can aid in rational optimization of perovskite devices. Likewise, gaining a comprehensive understanding of the degradation mechanism and identifying components of the perovskite structure that may be particularly susceptible to attack by moisture are vital to mitigate device degradation under operating conditions. This Account provides insight into the lifecycle of organic–inorganic lead halide perovskites, including (i) the nature of the precursor solution, (ii) formation of solid-state perovskite thin films and single crystals, and (iii) transformation of perovskites into hydrated phases upon exposure to moisture. In particular, spectroscopic and structural characterization techniques shed light on the thermally driven evolution of the perovskite structure. By tuning precursor stoichiometry and chemistry, and thus the lead halide charge-transfer complexes present in solution, crystallization kinetics can be tailored to yield improved thin film homogeneity. Because degradation of the as-formed perovskite film is in many ways analogous to its initial formation, the same suite of monitoring techniques reveals the moisture-induced transformation of low band gap methylammonium lead iodide (CH3NH3PbI3) to wide band gap hydrate compounds. The rate of degradation is increased upon exposure to light. Interestingly, the hydration process is reversible under certain conditions. This facile formation and subsequent chemical lability raises the question of whether CH3NH3PbI3 and its analogues are thermodynamically stable phases, thus posing a significant challenge to the development of transformative perovskite photovoltaics. Adequately addressing issues of structural and chemical stability under real-world operating conditions is paramount if perovskite solar cells are to make an impact beyond the benchtop. Expanding our fundamental knowledge of lead halide perovskite formation and degradation pathways can facilitate fabrication of stable, high-quality perovskite thin films for the next generation of photovoltaic and light emitting devices.
CitationMaking and Breaking of Lead Halide Perovskites 2016, 49 (2):330 Accounts of Chemical Research
SponsorsWe acknowledge the support of King Abdullah University of Science and Technology (KAUST) through the Award OCRF-2014-CRG3-2268. The previously published material discussed in this Account was supported by the U.S. Department of Energy Office of Science, Office of Basic Energy Sciences under Award Number DE-FC02-04ER15533. This is contribution number NDRL 5090 from the Notre Dame Radiation Laboratory.
PublisherAmerican Chemical Society (ACS)
JournalAccounts of Chemical Research
- The Importance of Moisture in Hybrid Lead Halide Perovskite Thin Film Fabrication.
- Authors: Eperon GE, Habisreutinger SN, Leijtens T, Bruijnaers BJ, van Franeker JJ, deQuilettes DW, Pathak S, Sutton RJ, Grancini G, Ginger DS, Janssen RA, Petrozza A, Snaith HJ
- Issue date: 2015 Sep 22
- Rational Strategies for Efficient Perovskite Solar Cells.
- Authors: Seo J, Noh JH, Seok SI
- Issue date: 2016 Mar 15
- The effect of illumination on the formation of metal halide perovskite films.
- Authors: Ummadisingu A, Steier L, Seo JY, Matsui T, Abate A, Tress W, Grätzel M
- Issue date: 2017 May 11
- Hybrid Perovskites for Photovoltaics: Charge-Carrier Recombination, Diffusion, and Radiative Efficiencies.
- Authors: Johnston MB, Herz LM
- Issue date: 2016 Jan 19
- Solution growth of single crystal methylammonium lead halide perovskite nanostructures for optoelectronic and photovoltaic applications.
- Authors: Fu Y, Meng F, Rowley MB, Thompson BJ, Shearer MJ, Ma D, Hamers RJ, Wright JC, Jin S
- Issue date: 2015 May 6