Do biological-based strategies hold promise to biofouling control in MBRs?
KAUST DepartmentBiological and Environmental Sciences and Engineering (BESE) Division
Water Desalination and Reuse Research Center (WDRC)
MetadataShow full item record
AbstractBiofouling in membrane bioreactors (MBRs) remains a primary challenge for their wider application, despite the growing acceptance of MBRs worldwide. Research studies on membrane fouling are extensive in the literature, with more than 200 publications on MBR fouling in the last 3 years; yet, improvements in practice on biofouling control and management have been remarkably slow. Commonly applied cleaning methods are only partially effective and membrane replacement often becomes frequent. The reason for the slow advancement in successful control of biofouling is largely attributed to the complex interactions of involved biological compounds and the lack of representative-for-practice experimental approaches to evaluate potential effective control strategies. Biofouling is driven by microorganisms and their associated extra-cellular polymeric substances (EPS) and microbial products. Microorganisms and their products convene together to form matrices that are commonly treated as a black box in conventional control approaches. Biological-based antifouling strategies seem to be a promising constituent of an effective integrated control approach since they target the essence of biofouling problems. However, biological-based strategies are in their developmental phase and several questions should be addressed to set a roadmap for translating existing and new information into sustainable and effective control techniques. This paper investigates membrane biofouling in MBRs from the microbiological perspective to evaluate the potential of biological-based strategies in offering viable control alternatives. Limitations of available control methods highlight the importance of an integrated anti-fouling approach including biological strategies. Successful development of these strategies requires detailed characterization of microorganisms and EPS through the proper selection of analytical tools and assembly of results. Existing microbiological/EPS studies reveal a number of implications as well as knowledge gaps, warranting future targeted research. Systematic and representative microbiological studies, complementary utilization of molecular and biofilm characterization tools, standardized experimental methods and validation of successful biological-based antifouling strategies for MBR applications are needed. Specifically, in addition, linking these studies to relevant operational conditions in MBRs is an essential step to ultimately develop a better understanding and more effective and directed control strategy for biofouling. © 2013 Elsevier Ltd.
SponsorsThe preparation of this article was supported by discretionary investigator funds (Pascal Saikaly) at King Abdullah University of Science and Technology (KAUST).
- Relation between EPS adherence, viscoelastic properties, and MBR operation: Biofouling study with QCM-D.
- Authors: Sweity A, Ying W, Ali-Shtayeh MS, Yang F, Bick A, Oron G, Herzberg M
- Issue date: 2011 Dec 1
- Influence of solids retention time on membrane fouling: characterization of extracellular polymeric substances and soluble microbial products.
- Authors: Duan L, Tian Z, Song Y, Jiang W, Tian Y, Li S
- Issue date: 2015
- Hybridization of physical cleaning and quorum quenching to minimize membrane biofouling and energy consumption in a membrane bioreactor.
- Authors: Weerasekara NA, Choo KH, Lee CH
- Issue date: 2014 Dec 15
- Effect of solid retention time on membrane fouling in membrane bioreactor: from the perspective of quorum sensing and quorum quenching.
- Authors: Yu H, Xu G, Qu F, Li G, Liang H
- Issue date: 2016 Sep
- Upflow anaerobic sludge blanket reactor--a review.
- Authors: Bal AS, Dhagat NN
- Issue date: 2001 Apr