Structural level characterization of base oils using advanced analytical techniques
Adam, Frederick M.
Panda, Saroj K.
Al-Hajji, Adnan A.
KAUST DepartmentChemical Engineering Program
Clean Combustion Research Center
Combustion and Pyrolysis Chemistry (CPC) Group
Physical Science and Engineering (PSE) Division
Online Publication Date2015-05-08
Print Publication Date2015-05-21
Permanent link to this recordhttp://hdl.handle.net/10754/564174
MetadataShow full item record
AbstractBase oils, blended for finished lubricant formulations, are classified by the American Petroleum Institute into five groups, viz., groups I-V. Groups I-III consist of petroleum based hydrocarbons whereas groups IV and V are made of synthetic polymers. In the present study, five base oil samples belonging to groups I and III were extensively characterized using high performance liquid chromatography (HPLC), comprehensive two-dimensional gas chromatography (GC×GC), and Fourier transform ion cyclotron resonance mass spectrometry (FT-ICR MS) equipped with atmospheric pressure chemical ionization (APCI) and atmospheric pressure photoionization (APPI) sources. First, the capabilities and limitations of each analytical technique were evaluated, and then the availed information was combined to reveal compositional details on the base oil samples studied. HPLC showed the overwhelming presence of saturated over aromatic compounds in all five base oils. A similar trend was further corroborated using GC×GC, which yielded semiquantitative information on the compound classes present in the samples and provided further details on the carbon number distributions within these classes. In addition to chromatography methods, FT-ICR MS supplemented the compositional information on the base oil samples by resolving the aromatics compounds into alkyl- and naphtheno-subtituted families. APCI proved more effective for the ionization of the highly saturated base oil components compared to APPI. Furthermore, for the detailed information on hydrocarbon molecules FT-ICR MS revealed the presence of saturated and aromatic sulfur species in all base oil samples. The results presented herein offer a unique perspective into the detailed molecular structure of base oils typically used to formulate lubricants. © 2015 American Chemical Society.
CitationHourani, N., Muller, H., Adam, F. M., Panda, S. K., Witt, M., Al-Hajji, A. A., & Sarathy, S. M. (2015). Structural Level Characterization of Base Oils Using Advanced Analytical Techniques. Energy & Fuels, 29(5), 2962–2970. doi:10.1021/acs.energyfuels.5b00038
SponsorsWe thank the Clean Combustion Research Center at KAUST and Fuel Technology Team at Saudi Aramco for funding this work under the FUELCOM program.
PublisherAmerican Chemical Society (ACS)
JournalEnergy & Fuels