Measurement of the rate of hydrogen peroxide thermal decomposition in a shock tube using quantum cascade laser absorption near 7.7 μm
KAUST DepartmentClean Combustion Research Center
Physical Sciences and Engineering (PSE) Division
Mechanical Engineering Program
Chemical Kinetics & Laser Sensors Laboratory
Permanent link to this recordhttp://hdl.handle.net/10754/563048
MetadataShow full item record
AbstractHydrogen peroxide (H2O2) is formed during hydrocarbon combustion and controls the system reactivity under intermediate temperature conditions. Here, we measured the rate of hydrogen peroxide decomposition behind reflected shock waves using midinfrared absorption of H2O 2 near 7.7 μm. We performed the experiments in diluted H 2O2/Ar mixtures between 930 and 1235 K and at three different pressures (1, 2, and 10 atm). Under these conditions, the decay of hydrogen peroxide is sensitive only to the decomposition reaction rate, H 2O2 + M → 2OH + M (k1). The second-order rate coefficient at low pressures (1 and 2 atm) did not exhibit any pressure dependence, suggesting that the reaction was in the low-pressure limit. The rate data measured at 10 atm exhibited falloff behavior. The measured decomposition rates can be expressed in Arrhenius forms as follows: k1(1 and 2 atm)=10(16.29±0.12)× exp (-21993±301/T)(cm 3 mol -1s-1) k1(10 atm)=10(15.24±0.10)× exp (-19955±247/T)(cm 3 mol -1s-1) © 2013 Wiley Periodicals, Inc.
SponsorsWe would like to acknowledge the funding provided by the Clean Combustion Research Center at King Abdullah University of Science and Technology, Thuwal, Saudi Arabia, and by Saudi Aramco under the FUELCOM program. Dr. Fittschen thanks the European Commission for funding through the Erasmus Mundus Gulf Countries Programme (EMA2-STRAND 2, LOT4).