Porous materials with optimal adsorption thermodynamics and kinetics for CO2 separation
AuthorsNugent, Patrick S.
Burd, Stephen D.
Forrest, Katherine A.
Pham, Tony T.
Zaworotko, Michael J.
KAUST DepartmentAdvanced Membranes and Porous Materials Research Center
Chemical Science Program
Functional Materials Design, Discovery and Development (FMD3)
Physical Science and Engineering (PSE) Division
KAUST Grant NumberFIC/2010/06
Online Publication Date2013-02-27
Print Publication Date2013-03
Permanent link to this recordhttp://hdl.handle.net/10754/562662
MetadataShow full item record
AbstractThe energy costs associated with the separation and purification of industrial commodities, such as gases, fine chemicals and fresh water, currently represent around 15 per cent of global energy production, and the demand for such commodities is projected to triple by 2050 (ref. 1). The challenge of developing effective separation and purification technologies that have much smaller energy footprints is greater for carbon dioxide (CO2) than for other gases; in addition to its involvement in climate change, CO 2 is an impurity in natural gas, biogas (natural gas produced from biomass), syngas (CO/H 2, the main source of hydrogen in refineries) and many other gas streams. In the context of porous crystalline materials that can exploit both equilibrium and kinetic selectivity, size selectivity and targeted molecular recognition are attractive characteristics for CO 2 separation and capture, as exemplified by zeolites 5A and 13X (ref. 2), as well as metal-organic materials (MOMs). Here we report that a crystal engineering or reticular chemistry strategy that controls pore functionality and size in a series of MOMs with coordinately saturated metal centres and periodically arrayed hexafluorosilicate (SiF 6 2-) anions enables a 'sweet spot' of kinetics and thermodynamics that offers high volumetric uptake at low CO2 partial pressure (less than 0.15 bar). Most importantly, such MOMs offer an unprecedented CO 2 sorption selectivity over N2, H 2 and CH 4, even in the presence of moisture. These MOMs are therefore relevant to CO2 separation in the context of post-combustion (flue gas, CO2/N2), pre-combustion (shifted synthesis gas stream, CO 2/H 2) and natural gas upgrading (natural gas clean-up, CO2/CH 4). © 2013 Macmillan Publishers Limited. All rights reserved.
SponsorsThis publication is based on work supported by KAUST award number FIC/2010/06 (ME. and M.J.Z.) and KAUST start up funds (RE.). B.S. acknowledges computational resources made available by an XSEDE grant (number TG-DMR090028). Single-crystal diffraction experiments on SIFSIX-2-Cu-I were conducted at the Advanced Photon Source on beamline 15ID-B of ChemMatCARS Sector 15, which is principally supported by the National Science Foundation/Department of Energy under grant number NSF/CHE-0822838. Use of the Advanced Photon Source was supported by the US Department of Energy, Office of Science, Office of Basic Energy Sciences under contract number DE-AC02-06CH11357.
RelationsIs Supplemented By:
Nugent, P., Belmabkhout, Y., Burd, S. D., Cairns, A. J., Luebke, R., Forrest, K., … Zaworotko, M. J. (2013). CCDC 914600: Experimental Crystal Structure Determination [Data set]. Cambridge Crystallographic Data Centre. https://doi.org/10.5517/cczpq7l. DOI: 10.5517/cczpq7l HANDLE: 10754/624765
Nugent, P., Belmabkhout, Y., Burd, S. D., Cairns, A. J., Luebke, R., Forrest, K., … Zaworotko, M. J. (2013). CCDC 914601: Experimental Crystal Structure Determination [Data set]. Cambridge Crystallographic Data Centre. https://doi.org/10.5517/cczpq8m. DOI: 10.5517/cczpq8m HANDLE: 10754/624766
- Hydroquinone and Quinone-Grafted Porous Carbons for Highly Selective CO2 Capture from Flue Gases and Natural Gas Upgrading.
- Authors: Wang J, Krishna R, Yang J, Deng S
- Issue date: 2015 Aug 4
- Alkylamine-tethered stable metal-organic framework for CO(2) capture from flue gas.
- Authors: Hu Y, Verdegaal WM, Yu SH, Jiang HL
- Issue date: 2014 Mar
- Water Enables Efficient CO<sub>2</sub> Capture from Natural Gas Flue Emissions in an Oxidation-Resistant Diamine-Appended Metal-Organic Framework.
- Authors: Siegelman RL, Milner PJ, Forse AC, Lee JH, Colwell KA, Neaton JB, Reimer JA, Weston SC, Long JR
- Issue date: 2019 Aug 21
- Polyethyleneimine incorporated metal-organic frameworks adsorbent for highly selective CO2 capture.
- Authors: Lin Y, Yan Q, Kong C, Chen L
- Issue date: 2013
- Mathematical modeling and experimental breakthrough curves of carbon dioxide adsorption on metal organic framework CPM-5.
- Authors: Sabouni R, Kazemian H, Rohani S
- Issue date: 2013 Aug 20